GE akta start Maintenance Manual page 195

Step
4
5
ÄKTA start Maintenance Manual 29-0603-08 AC
Action
Hold the Bowl assembly and orient the Bowl with the aligning ribs oriented
towards the aligning groove on the Bowl holder.
Note:
Do not lift the fraction collector by holding the Dispenser arm.
Tip:
If it is hard to locate the alignment feature in corresponding parts, hold the
Bowl assembly near the top of the Bowl holder and rotate the Bowl holder
unless the aligning ribs gets located.
After locating the aligning features, leave the Bowl to slide freely into the
Bowl holder.
7 Disassembly
7.13 Frac30 Bowl assembly
195