Uv Monitor - GE akta start Maintenance Manual

5 Service and settings

5.4 UV Monitor

5.4

UV Monitor

Introduction
This section describes how to access the UV Monitor options, perform calibrations and
edit UV settings.
In this section
This section contains the following subsections:
Section
5.4.1 UV LED calibration
5.4.2 Diagnostics
5.4.3 Flow cell path length
5.4.4 Reset number of run hours
Access the UV Monitor options
Follow the instructions below to access the options for calibrating and troubleshooting
the UV Monitor.
Step
1
62
Action
In the Settings and service screen, tap Next:Next to access the 3
Result: The following screen opens.
ÄKTA start Maintenance Manual 29-0603-08 AC
See page
64
66
69
72
rd
screen.