GE akta start Maintenance Manual page 106

5 Service and settings
5.12 Frac30
5.12.2 Diagnostics
Step
3
106
Action
Tap Home test and visually observe that Frac30 rotates to home position
(tube no. 1) from current position.
Note:
If Frac30 does not rotate the Bowl assembly, check if the Frac30 cable is
connected properly to ÄKTA start.
If the cable is not connected properly, connect the cable properly and secure
it in position with a screw driver if required.
ÄKTA start Maintenance Manual 29-0603-08 AC