CRANKSHAFT AND BALANCER SHAFT
INSTALLATION
1. Install:
• Balancer driven gear
• Balancer shaft
TIP
• Face the punch mark
driven gear inward.
• Align the projection
with the slot
in the balancer driven gear.
2. Install:
• Water pump drive gear
TIP
Align the punch mark
gear with the shorter spline
shaft end.
3. Install:
• Right balancer weight
• Left balancer weight
• Washers
• Lock washers
• Balancer weight bolts
TIP
Align the punch mark
weight with the shorter spline
ancer shaft end.
5-84
ENG
on the balancer
on the balancer shaft
on the water pump
on the balancer
on the balancer
on the bal-