DRIVE CHAIN HOUSING
INSTALLATION (RS90GTZ/RS90LTGTZ)
1. During installation, pay attention to the fol-
lowing.
Properly install the rubber seal onto the drive
chain housing, making sure that there are no
gaps.
Be sure to install the collars in their orig-
inal positions, otherwise the brake disc
and secondary shaft will stick.
0.2 ~ 0.7 mm (0.008 ~ 0.028 in)
: ESSO beacon 325 grease or Aeroshell
grease #7A
For the secondary shaft and drive chain hous-
ing
installation,
SHAFT".
4-29
POWR
TR
refer
to
"SECONDARY