Yamaha RS90GTZ Service Manual page 455

Parts to be tightened
Rear axle nut
Set bolt (front axle)
Speed sensor nut
Bearing holder nut
Gear unit (speed sensor) bolt
*: ESSO beacon 325 grease or Aeroshell grease #7A
TIP
1. Apply engine oil to the bolt thread.
2. Tighten the bolt to 120 Nm (12 m•kgf, 85 ft•lbf).
3. Loosen and retighten the bolt to 60 Nm (6.0 m•kgf, 43 ft•lbf).
TIGHTENING TORQUE
Tightening torque
Nm m•kgf ft•lbf
75 7.5 54
9 0.9 6.5
20 2.0 14
20 2.0 14
40 4.0 29
9-22
SPEC
Remarks
(RST90GTZ)
®
Apply LOCTITE