Oil Level Switch - Yamaha RS90GTZ Service Manual

SIGNAL SYSTEM
2. Connect:
• Analog pocket tester (pocket tester)
(to the coolant temperature sensor)
TIP
Set the tester selector to the "Ω × 1k" position.
3. Immerse the coolant temperature sensor
in coolant
perature sensor operation.
Coolant temperature sensor
resistance:
5.21 ~ 6.37 kΩ at 0 °C (32 °F)
290 ~ 354 Ω at 80 °C (176°F)
170 ~ 208 Ω at 100 °C (212 °F)
Thermometer
NOTICE
Never heat the coolant to a temperature of
120 °C (248 °F) or more.
4. If the coolant temperature sensor operation
is defective, replace it.
5. Install the coolant temperature sensor.
Coolant temperature sensor:
23 Nm (2.3 m•kgf, 17 ft•lbf)
NOTICE
Do not overtighten the coolant temperature
sensor.

OIL LEVEL SWITCH

1. Remove:
• Oil level switch
8-50
ELEC
and check the coolant tem-