Load Control Relay - Yamaha RS90GTZ Service Manual

LIGHTING SYSTEM

LOAD CONTROL RELAY

1. Remove:
• Load control relay
RS90GTZ/RS90LTGTZ
RST90GTZ
Inspection steps:
• Connect the analog pocket tester (pocket
tester) (Ω × 1) and battery (12 V) to the load
control relay terminals as shown.
Positive battery terminal → Brown
Negative battery terminal →
Positive tester probe → Red
Negative tester probe → White
• If load control relay does not have continuity
between the red and white terminals, replace
it.
8-37
ELEC
Brown/Blue