Removal; Inspection - Yamaha RS90GTZ Service Manual

FUEL TANK

REMOVAL

1. Extract the fuel in the fuel tank through the
fuel tank cap with a pump.
2. Remove:
• Fuel hose connector holder
• Fuel hose
WARNING
Cover fuel hose connections with a cloth
when disconnecting them. Residual pres-
sure in the fuel lines could cause fuel to
spurt out when removing the hoses.
NOTICE
Be sure to disconnect the fuel hose by
hand. Do not forcefully disconnect the hose
with tools.
TIP
• When removing the fuel hose from the fuel
pump, remove the fuel hose connector holder
first, and next, insert a slotted head screw-
driver etc. in the slot part
connector cover
driver in the direction of the arrow, and
remove the fuel hose.
• Before removing the hose, place a few rags in
the area under where it will be removed.
3. Remove:
• Fuel pump bracket
• Fuel pump
• Fuel pump gasket
• Fuel sender
NOTICE
• Do not drop the fuel pump or give it a
strong shock.
• Do not touch the base section of the fuel
sender.

INSPECTION

1. Inspect:
• Fuel pump body
Obstruction → Clean.
Cracks/damage → Replace fuel pump
assembly.
5-2
ENG
of the fuel hose
, then slide the screw-