Installation - Yamaha Apex RX10PA 2011 Supplementary Service Manual

STEERING
3. Inspect:
• Relay rod
• Tie rods
• Steering shaft
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten bent rods. This
may dangerously weaken the rods.
4. Check:
• Rod end movement
Rod end free play exists → Replace the rod
end.
Rod end turns roughly → Replace the rod
end.
5. Inspect:
• Right relay arm
• Left relay arm
• Idler arm
Cracks/damage → Replace.
• Bearings
Wear/damage → Replace.

INSTALLATION

1. Install:
• Relay arms
• Bushings
• Washers
• Clips
Relay arm bolt:
67 Nm (6.7 m•kgf, 48 ft•lbf)
58
CHAS