Yamaha RHINO 450 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. RHINO 450
  6. Owner's manual

Yamaha RHINO 450 Owner's Manual

Independent suspension
Hide thumbs Also See for RHINO 450:
Table of Contents

Advertisement

Quick Links

READ THIS MANUAL CAREFULLY!
It contains important safety information.
OWNER'S MANUAL
YXR45FX
LIT-11626-21-21
2P5-F8199-12

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RHINO 450

Summary of Contents for Yamaha RHINO 450

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YXR45FX LIT-11626-21-21 2P5-F8199-12...
  • Page 2 EBU00776...
  • Page 3 Yamaha experience in the production of fine sporting, touring, and pace-setting racing vehicles. With the purchase of this Yamaha, you can now appreciate the high degree of crafts- manship and reliability that have made Yamaha a leader in these fields.
  • Page 4 EVU00021 IMPORTANT MANUAL INFORMATION FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SE- RIOUS INJURY OR DEATH. Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
  • Page 5 This vehicle complies with almost all state off-highway noise level and spark arrester laws and regulations. YXR45FX OWNER’S MANUAL ©2007 by Yamaha Motor Corporation, U.S.A. 1st edition, July 2007 All rights reserved. Any reprinting or unauthorized use without the written...

  • Page 6: Table Of Contents

    EVU00050 Fuel level check window ....4-15 CONTENTS Starter (choke) ......4-15 Doors..........4-16 LOCATION OF THE WARNING Seats ..........4-16 AND SPECIFICATION LABELS..1-1 Seat belts ........4-17 Glove compartment .......4-18 SAFETY INFORMATION....2-1 Cargo bed ........4-18 Front and rear shock absorber DESCRIPTION ......... 3-1 adjustment ........4-20 Trailer hitch bracket and INSTRUMENT AND CONTROL...
  • Page 7 Steering........... 5-8 Passenger requirements ....7-3 Fittings and fasteners...... 5-8 Occupant protection system.... 7-4 Lights..........5-9 Protective structure......7-5 Switches.......... 5-9 Seat belts......... 7-6 Control cables ......... 5-9 Doors ..........7-8 Tires ..........5-9 Passenger handholds...... 7-9 Seat and hip restraints ....7-10 OPERATION........
  • Page 8 Operation on different surfaces Differential gear oil ......8-17 and terrains........7-18 Coolant...........8-19 Hills ..........7-19 Axle boots ........8-20 Uphill..........7-19 Spark plug inspection ....8-21 Downhill ......... 7-20 Cleaning the air filter elements ..8-24 Rough terrain......... 7-21 Drive select lever box check Pavement ........
  • Page 9 SIDE × SIDE VEHICLE LIMITED Battery ........... 8-45 Battery maintenance ..... 8-46 WARRANTY........ 11-6 Jump-starting ........ 8-47 YAMAHA EXTENDED SERVICE Fuse replacement ......8-49 (Y.E.S.) ........11-7 Replacing a headlight bulb ... 8-51 Headlight beam adjustment ..8-53 Tail/brake light bulb replacement ........

  • Page 10: Location Of The Warning And Specification Labels

    EVU00060 L OCATION OF THE WARNING AND SPECIFICATION LABELS...
  • Page 11 Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a re- placement label is available from your Yamaha dealer. WARNING WARNING...
  • Page 12 WARNING WARNING Keep hands, body, and other people away from pinch points when lowering bed. Do not hold the cage/frame while closing bed. YAMAHA 5B4-K7764-00 YAMAHA 5B4-F1696-00...
  • Page 13 WARNING MAX 7.3 INCH (185MM) YAMAHA 5UG-F151J-00 YAMAHA 5B4-F4897-00...
  • Page 14 ü risk of overturn or other Feet On floorboard, ready to brace, and door closed. accidents. YAMAHA 5B4-F1558-00 Secure load to prevent it from shifting. Never load more than 50 kg (110 lb) tongue weight on the towing bracket.
  • Page 15 WARNING • • • • DRIVER • UNDER • • • • • YAMAHA 5B4-F1568-01...

  • Page 16: Safety Information

    EVU00070 SAFETY INFORMATION Be a responsible owner As the vehicle’s owner, you are responsible for the safe and proper operation of your Rhino. While understanding all parts of this manual are important for vehicle ownership, be sure to read this chapter and the instructions in Chapter 7 before operating the Rhino. Also use these two chapters and the labels on the vehicle to instruct new operators and passengers.
  • Page 17 Before you operate the Rhino Prepare yourself and your passenger: • This vehicle is intended for use only by an operator 16 or older with a valid motor vehicle li- cense. DRIVER UNDER • This vehicle is designed to carry the driver and one passenger. Never carry passengers in the cargo bed.
  • Page 18 Prepare your vehicle Perform the pre-operation checks each time you use the vehicle to make sure it is in safe operat- ing condition. Failure to inspect or maintain the vehicle properly increases the possibility of an ac- cident or equipment damage. See pages 5-1–5-2 for a list of pre-operation checks. Prepare your load or trailer Carrying loads, towing a trailer, or pulling objects can affect handling, stability, and risk of overturn or other accidents.
  • Page 19 While using the Rhino Keep your body completely inside the vehicle at all times. Keep both hands on the steering wheel. Be sure passenger is seated, belted, and holding onto the handholds. Close doors be- fore driving. Any part of your body (arms, legs, and head) outside the vehicle can be struck by objects your vehicle is passing or crushed by the vehicle cage/frame in a rollover accident.
  • Page 20 Avoid rollovers: • Use care when turning: • Turning the steering wheel too far or too fast can result in a rollover. • Avoid sideways sliding, skidding, or fishtailing, and never do donuts. • Slow down before entering a turn and avoid hard braking in a turn. •...
  • Page 21 • Drive straight up and down inclines, not across them. If crossing a hill is unavoidable, drive slowly and turn downhill immediately if you feel the vehicle may tip. • Avoid paved surfaces. Turn gradually and go slowly if you must drive on pavement. This ve- hicle is designed for off-road use only.
  • Page 22 When loaded with cargo or towing a trailer: • Reduce speed, operate in low gear only, and allow more room to stop. • Avoid hills and rough terrain. Use extreme caution when towing or carrying a load on in- clines. •...
  • Page 23 Avoid carbon monoxide poisoning All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nausea, confusion, and eventually death. Carbon monoxide is a colorless, odorless, tasteless gas which may be present even if you do not see or smell any engine exhaust.
  • Page 24 Many companies with no connection to Yamaha manufacture parts and accessories or offer other modifications for Yamaha vehicles. Yamaha is not in a position to test the products that these af- termarket companies produce. Therefore, Yamaha can neither endorse nor recommend the use of accessories not sold by Yamaha or modifications not specifically recommended by Yamaha, even if sold and installed by a Yamaha dealer.

  • Page 25: Specifications

    Aftermarket tires and rims The tires and rims that came with your Rhino were designed to match the performance capabili- ties and to provide the best combination of handling, braking, and comfort. Other tires, rims, sizes, and combinations may not be appropriate. Refer to pages 8-42–8-44 for tire specifications and more information on replacing your tires.

  • Page 26: Description

    EVU00080 D ESCRIPTION J K L 1. Headlights 14. Spark arrester 2. Front shock absorber assembly spring preload adjusting ring 15. Passenger seat belt 3. Brake fluid reservoir 16. Passenger seat 4. Air filter elements (engine and air intake duct) 17.
  • Page 27 The vehicle you have purchased may differ slightly from those shown in the figures of this R S T UV manual. [ Z Y 26. Light switch 27. Steering wheel 28. Starter (choke) 29. Main switch 30. On-Command four-wheel-drive and differential gear lock switches 31.

  • Page 28: Instrument And Control Functions

    EVU00130 I NSTRUMENT AND CONTROL Functions of the respective switch positions FUNCTIONS are as follows: EVU00140 All electrical circuits are supplied with Main switch power, and the headlights and tail- lights come on when the light switch is OFF: All electrical circuits are switched off. The key can be removed in this posi- tion.

  • Page 29: Indicator And Warning Lights

    10 seconds or more. If the indicator light flashes under any other 1. Parking brake indicator light “P” circumstances, have a Yamaha dealer check 2. Reverse indicator light “R” the speed sensor circuit. 3. Neutral indicator light “N”...
  • Page 30 EVU00181 On-Command four-wheel-drive indicator Coolant temperature warning light “ ” light “ ” If the coolant temperature reaches a specified This indicator light comes on when the level, this light comes on to warn that the cool- On-Command four-wheel-drive switch is in ant temperature is too hot.
  • Page 31 Coolant temperature Coolant temperature warning light comes on warning light does not momentarily. come on. Coolant temperature and electrical circuit are OK. Ask a Yamaha dealer to Go ahead with riding. inspect the electrical circuit.

  • Page 32: Indicator And Warning Lights (Special Edition Models)

    EVU00150 EVU01131 Indicator and warning lights On-Command differential gear lock indica- (Special Edition models) tor light “DIFF. LOCK” This indicator light and the On-Command dif- ferential gear lock indicator in the display come on when the On-Command differential gear lock switch is set to the “LOCK” position. When the switch is set to “LOCK”, the On- Command differential gear lock indicator light will flash until the differential gear is locked.
  • Page 33 If the indicator light flashes under any other circumstances or the speedometer does not Due to the synchronizing mechanism in the show the speed while riding, have a Yamaha differential gear case, the four-wheel-drive dealer check the speed sensor circuit.

  • Page 34: Multi-Function Meter Unit (Special Edition Models)

    EVU00181 EVU01630 Coolant temperature warning light “ ” Multi-function meter unit If the coolant temperature reaches a specified (Special Edition models) level, this light comes on to warn that the cool- ant temperature is too hot. If the light comes on during operation, stop the engine as soon as it is safe to do so and allow the engine to cool down for about 10 minutes.
  • Page 35 two tripmeters (which show the distance Odometer and tripmeter modes traveled since they were last set to zero) Pushing the “TRIP/ODO” button switches the a clock display between the odometer mode “ODO” an hour meter (which shows the total time and the tripmeter modes “A”...
  • Page 36 Clock mode Fuel meter Pushing the “ ” button switches the dis- The fuel meter indicates the amount of fuel in play between the clock mode “CLOCK” and the fuel tank. The display segments of the fuel the hour meter mode “HOUR” in the following meter disappear from “F”...

  • Page 37: Switches

    EVU00230 Switches NOTICE Do not use the headlights with the engine EVU00240 Light switch “OFF/ ” turned off for an extended period of time. The battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it.
  • Page 38 EVU01183 On-Command four-wheel-drive and differ- Four-wheel drive (“4WD”): Power is sup- ential gear lock switches plied to the rear and front wheels. Four-wheel drive with the differential gear locked (“4WD-LOCK”): Power is supplied to the rear and front wheels with the differ- ential gear locked.

  • Page 39: Accelerator Pedal

    EVU00260 EVU00270 Accelerator pedal Brake pedal Press the accelerator pedal down to increase Press the brake pedal to slow or stop the ve- engine speed. Spring pressure returns the hicle. pedal to the rest position when released. Al- ways check that the accelerator pedal returns normally before starting the engine.

  • Page 40: Parking Brake Lever

    EVU00280 Parking brake lever The parking brake lever is located at the right side of the driver’s seat. It will help keep the vehicle from moving while parked. To set the parking brake, pull the lever up completely. To release the parking brake, pull up on the lever, press the release button, and then push the lever all the way down.

  • Page 41: Drive Select Lever

    EVU00290 EVU00300 Drive select lever Fuel tank cap The drive select lever is used to shift the vehi- Remove the fuel tank cap by turning it coun- cle into the low, high, neutral, and reverse po- terclockwise. sitions. (Refer to pages 6-6–6-7 for the drive select lever operation.) 1.

  • Page 42: Fuel Level Check Window

    EVU00320 Fuel level check window Starter (choke) “ ” The amount of fuel in the fuel tank can be Starting a cold engine requires a richer air-fuel checked through the fuel level check window. mixture. A separate starter circuit supplies this If the fuel level is low, refuel as soon as possi- mixture.

  • Page 43: Doors

    EVU00330 Doors Seats To open a door, simply pull the latch outward. To remove a seat, pull its seat lock lever up- To close a door, push or pull the door inward ward, lift the front of the seat, and then slide until it is securely latched.

  • Page 44: Seat Belts

    EVU00340 To install a seat, insert the projections on the Seat belts rear of the seat into the seat holders and push This vehicle is equipped with three-point seat down on the seat at the front. Make sure the belts for both the operator and the passenger. seats are securely latched.

  • Page 45: Glove Compartment

    EVU01191 EVU00351 Glove compartment Cargo bed NOTICE To protect from damage, do not put metal products, like tools or sharply edged prod- ucts, directly in the glove compartment. If they must be stored, wrap them in appro- priate cushioning material. 1.
  • Page 46 Opening and closing the tailgate Lifting and lowering the cargo bed 1. Tailgate 2. Latch (× 2) 1. Cargo bed release lever To open To lift Unhook the latches, and then lower the tail- Push down the cargo bed release lever on the gate.

  • Page 47: Front And Rear Shock Absorber Adjustment

    EVU00360 To lower Front and rear shock absorber adjustment With hands and fingers clear of pinch points, The spring preload can be adjusted to suit the lower the cargo bed slowly to its original posi- operating conditions. You can reduce preload tion and be sure it is locked into place.
  • Page 48 Adjust the spring preload as follows: A special wrench can be obtained at a To increase the spring preload, turn the ad- Yamaha dealer to make this adjustment. justing ring in direction a. Standard position: B To decrease the spring preload, turn the ad- A- Minimum (soft) justing ring in direction b.

  • Page 49: Trailer Hitch Bracket And Receiver

    The auxiliary DC jack dard trailer hitch. Trailer towing equipment can be used for suitable work lights, radios, can be obtained at a Yamaha dealer. (See etc. The auxiliary DC jack should only be used pages 6-11–6-13 for precaution information.) when the engine is running.
  • Page 50 NOTICE Do not use accessories requiring more than the maximum capacity stated above. This may overload the circuit and cause the fuse to blow. If accessories are used without the en- gine running, the battery will lose its charge and engine starting may become difficult.

  • Page 51: For Your Safety - Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspect- ed by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 52 ITEM ROUTINE PAGE Final gear oil/ • Check for leakage. 5-7, 8-15–8-18 Differential gear oil Accelerator pedal • Check for proper accelerator pedal operation. Seat belts • Check for proper operation and belt wear. Steering • Check for proper operation. Fittings and fasteners •...

  • Page 53: Front And Rear Brakes

    Brake operation firm feeling when the brakes are applied. If Check the operation of the brakes at the start not, have the vehicle inspected by a Yamaha of every ride. Test the brakes at slow speed dealer. after starting out to make sure they are work- ing properly.

  • Page 54: Fuel

    EVU00400 Fuel 4. Be sure the fuel tank cap is closed se- Make sure there is sufficient gasoline in the curely. tank. WARNING WARNING Gasoline is poisonous and can cause inju- Gasoline and gasoline vapors are ex- ry or death. Handle gasoline with care. tremely flammable.
  • Page 55 WARNING! Never refill a fuel container by Yamaha because it may cause fuel system in the bed of any vehicle. Fire may result damage or vehicle performance problems.

  • Page 56: Engine Oil

    EVU00410 Engine oil Make sure the engine oil is at the specified level. Add oil as necessary. (See pages 8-10– 8-14.) NOTICE In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical addi- tives with oil.

  • Page 57: Coolant

    EVU00420 EVU00430 Coolant Final gear oil Check the coolant level in the coolant reser- Make sure the final gear oil is at the specified voir when the engine is cold (the coolant level level. Add oil as necessary. (See pages 8-15– will vary with engine temperature).

  • Page 58: Accelerator Pedal

    Have a Yamaha dealer repair Always check the tightness of chassis fittings as necessary for proper operation. and fasteners before a ride. Take the vehicle to a Yamaha dealer or refer to the Service Manual for correct tightening torque.

  • Page 59: Lights

    Tire pressure Check the operation of all switches. Have a Use the tire pressure gauge to check and ad- Yamaha dealer repair as necessary for proper just tire pressures when the tires are cold. Tire operation. pressures must be equal on both sides.
  • Page 60 Set tire pressures to the following specifica- tions: ACE-02E Recommended Minimum Maximum pressure 70 kPa 63 kPa 77 kPa Front (0.70 kgf/cm (0.63 kgf/cm (0.77 kgf/cm 10 psi) 9 psi) 11 psi) 98 kPa 91 kPa 105 kPa Rear (0.98 kgf/cm (0.91 kgf/cm (1.05 kgf/cm 14 psi)
  • Page 61 EVU00520 Tire wear limit When the tire groove decreases to 3 mm (0.12 in) due to wear, replace the tire. a. Tire wear limit 5-11...

  • Page 62: Operation

    If there is a zero and 20 hours. control or function you do not understand, ask your Yamaha dealer. For this reason, we ask that you read the fol- lowing material carefully. Because the engine...

  • Page 63: Starting A Cold Engine

    If any abnormality is noticed When the drive select lever is in the during this period, consult a Yamaha dealer. neutral position, the neutral indicator light should come on. If the neutral in- 0–10 hours:...
  • Page 64 3. Use the starter (choke) in reference to the figure: Position 1: Cold engine start – ambient temperature below 5 °C (40 °F). Position 2: Cold engine start – ambient temperature at 0 °C (30 °F)–30 °C (90 °F) warming up position. Position 3: Cold engine start –...
  • Page 65 If the engine fails to start, release the key, and WARNING then try starting it again. Wait a few seconds The speed of a cold engine may increase before the next attempt. Each attempt should enough as it warms up to cause the vehi- be as short as possible, to preserve battery cle to move on its own while the choke is energy.

  • Page 66: Starting A Warm Engine

    EVU00561 6. With the vehicle still in neutral, continue Warming up warming up the engine until it idles To get maximum engine life, always warm up smoothly, and return the starter (choke) the engine before starting off. To see whether to position 3 before riding.

  • Page 67: Drive Select Lever Operation And Reverse Driving

    Drive select lever operation and reverse 2. Apply the brake pedal, then shift by mov- driving ing the drive select lever along the shift guide. Make sure that the drive select le- NOTICE ver is completely shifted into position. Do not shift without coming to a complete stop and waiting for the engine to return to normal idle speed.
  • Page 68 Due to the synchro- backing. nizing mechanism in the engine, the light may not come on until the vehicle starts moving. If the light does not come on, ask a Yamaha dealer to inspect the reverse indicator light electrical circuit.

  • Page 69: On-Command Four-Wheel-Drive Switch And Differential Gear Lock Switch

    EVU01183 On-Command four-wheel-drive switch and “2WD”/“4WD” differential gear lock switch To change from 2WD to 4WD, stop the vehi- You may notice that the vehicle handles dif- cle, and then set the switch to “4WD”. When ferently in 2WD, 4WD, and 4WD-LOCK the vehicle is in 4WD, the four-wheel-drive in- (“DIFF.
  • Page 70 On-Command differential gear lock switch To lock the differential gear in 4WD, stop the “4WD”/“LOCK” vehicle, make sure the On-Command four- wheel-drive switch is set to “4WD”, move the differential gear lock lever to position b, and then set the switch to “LOCK”. When the dif- ferential gear is locked, the differential gear lock indicator light “...

  • Page 71: Parking

    EVU01210 For Special Edition models: Parking When the switch is set to “LOCK”, the dif- When parking, stop the engine and shift the ferential gear lock indicator and indicator drive select lever into the neutral position. Ap- light will flash until the differential gear is ply the parking brake to help prevent the vehi- locked.

  • Page 72: Loading

    EVU00630 Loading Do not exceed the maximum tongue Take extra precautions when driving with a weight. load or trailer. Follow these instructions and Make sure the load does not interfere always use common sense and good judg- with your control or ability to see ment when carrying cargo or towing a trailer.
  • Page 73 Use the hooks equipped on the cargo bed to MAXIMUM LOADING LIMIT tie down loads. Vehicle loading limit (total weight of cargo, operator, passenger and Choose a trailer hitch drawbar designed for accessories and tongue weight): use with a 5 cm (2 in) receiver. (See page 398 kg (877 lb) 4-22 for more information.) Cargo bed: 181 kg (400 lb)
  • Page 74 Operating when loaded with cargo or tow- Pulling something other than a trailer ing a trailer Yamaha recommends that loads be transport- Drive more slowly than you would without a ed in the bed or in a trailer. If you need to load.

  • Page 75: Basic Guide For Safe Use

    BASIC GUIDE FOR SAFE KNOW YOUR VEHICLE This off-road vehicle will handle and maneu- ver differently from cars, ATVs, go-carts, golf- As a Rhino owner you are responsible for the cars and grounds-keeping vehicles. The safe and proper operation of this vehicle. Rhino has higher ground clearance and other Read this chapter and review the safety in- features to handle rugged terrain, and, as a...

  • Page 76: Driver Requirements

    Doing things with a Rhino that some people Driver requirements do for thrills in other vehicles (such as side- This vehicle is intended for use only by an ways sliding, skidding, fishtailing, or donuts) operator 16 or older with a valid motor vehi- have led to side rollovers.

  • Page 77: Passenger Requirements

    Parents: Passenger requirements Many states have implemented new motor This vehicle is designed for the operator and vehicle licensing requirements for young driv- one passenger. Carrying passengers improp- ers. These requirements are in response to erly can lead to serious injury or death. As the the disproportionately high rate of crashes in- operator, you are responsible for your pas- volving youthful drivers.

  • Page 78: Occupant Protection System

    Occupant protection system 1. Passenger handhold 1. Passenger handhold 2. Seat belt 3. Door 1. Door...

  • Page 79: Protective Structure

    Protective structure WARNING The vehicle cage/frame provides a protective Do not make changes to the occupant pro- structure that helps limit intrusions by branch- tection system. If you install aftermarket es or other objects and may reduce your risk products or have your vehicle modified, of injury in accidents.

  • Page 80: Seat Belts

    Seat belts An unbelted occupant may strike the interior Seat belts should be worn by both driver and of the vehicle, the protective structure, or oth- passenger. Driver must be sure that the pas- er objects in an accident or during operation. senger is belted before driving.
  • Page 81 2. If the latch plate is not positioned in the correct location along the seat belt, squeeze the latch plate ends together along its long edges in order to more eas- ily adjust its location up or down along the length of the belt.

  • Page 82: Doors

    4. Put the lap portion of the belt low on your Doors hips. Pull up on the shoulder part so the The doors are designed to reduce the likeli- belt is snug across your hips. hood that you will stick your leg out to stop the 5.

  • Page 83: Passenger Handholds

    Passenger handholds Handholds are provided to grip during opera- tion to maintain proper position and balance. Holding onto the handholds helps to reduce the likelihood that the passenger puts a hand outside the vehicle if the vehicle begins to tip. There are two handholds on the protective structure and two handholds on the passen- ger’s left side, for the right and left hands.

  • Page 84: Seat And Hip Restraints

    Seat and hip restraints Floorboard The seat and hip restraints are designed to The floorboard allows you to brace your feet, help keep you in the vehicle. Do not hold onto which helps you keep your body in the vehicle hip restraint bar when the vehicle is moving.

  • Page 85: Steering Wheel

    Steering wheel CORRECT GRIP EXAMPLE Keep both hands on the steering wheel. Do not hold the steering wheel with your thumbs inside the rim. Keep your palms on the out- side of the steering wheel. Similar to other off- road vehicles, if the Rhino hits a deep rut or large obstacle, the steering wheel could brief- ly jerk in one direction or back and forth as the tires and vehicle respond to the obstacle.

  • Page 86: Learning To Operate Your Vehicle

    LEARNING TO OPERATE YOUR VEHICLE Both driver and passenger should wear the following to reduce risk of injury in an acci- Personal protective equipment dent: Approved motorcycle helmet that fits prop- erly Eye protection (goggles, helmet face shield, or protective eyewear) Over-the-ankle boots, gloves, long-sleeved shirt or jacket, and long pants An approved helmet and other personal pro-...

  • Page 87: Practice For New Rhino Users

    Wear eye protection when operating or riding the vehicle to reduce the risk of a serious ac- cident or injury. Eye protection, such as a face shield or goggles, may reduce the risk of for- eign material getting in your eyes and help prevent loss of vision.

  • Page 88: Getting Ready To Ride

    Getting ready to ride Turning Perform the Pre-Operation Checks on pages Use care in turns – turning the steering wheel 5-1–5-11. Follow the instructions starting on too far or too fast can result in loss of control page 6-2 to start the engine. Once it has or a rollover.

  • Page 89: Accelerating

    If you think or feel that the vehicle may tip or Accelerating roll, keep your body completely inside the pro- With the engine idling in neutral and your foot tective structure of the vehicle: on the brake, shift the drive select lever into Brace yourself by pressing your feet firmly low or high.

  • Page 90: Braking

    Braking Leaving the vehicle When slowing down or stopping, take your Do not get out of the vehicle while the engine foot off the accelerator pedal and press the is running and the drive select lever is in any brake pedal smoothly. Improper use of the gear.

  • Page 91: Parking On A Flat Area

    Parking on a flat area 4. With the brake pedal applied, set the When parking on a flat area, stop the engine parking brake. and shift the drive select lever into the neutral 5. Block the front and rear wheels with position.

  • Page 92: Operation On Different Surfaces And Terrains

    Operation on different surfaces and terrains Go slowly and proceed with caution when op- erating on an unfamiliar surface or terrain. This vehicle may handle differently in certain types of terrains or on certain surfaces. You may come upon hidden rocks, bumps, or holes without enough time to react.

  • Page 93: Hills

    Hills Uphill Choose carefully which hills you attempt to Do not attempt to climb hills until you have climb or descend. Avoid hills with slippery sur- mastered basic maneuvers on flat ground. faces or those where you will not be able to Drive straight up hills, and avoid crossing the see far enough ahead of you.

  • Page 94: Downhill

    Slow down when you reach the crest of the hill Downhill if you cannot see clearly what is on the other Check the terrain carefully before going side – there could be another person, an ob- downhill. When possible, choose a path that stacle, or a sharp drop-off.

  • Page 95: Rough Terrain

    If you are sliding or skidding, try to steer in the Rough terrain direction the vehicle is sliding, to regain con- Operation over rough terrain should be done trol. For example, if you feel the back of the with caution. vehicle start to slide to your right, steer to the Look for and avoid obstacles that could right.

  • Page 96: Water

    Water NOTICE If you must cross shallow, slow-moving water After driving your vehicle in water, be sure up to the depth of the vehicle’s floorboards, to drain the trapped water by removing the choose your path carefully to avoid sharp check hose at the bottom of the air filter drop-offs, large rocks, or slippery surfaces case, the V-belt cooling duct check hoses,...

  • Page 97: Loose Terrain/Slippery Terrain

    Loose terrain/slippery terrain Brush or wooded areas When driving on slippery terrain, including When operating in areas with brush or trees, wet, muddy, or icy conditions, as well as loose watch carefully on both sides and above the gravel, be aware that you could begin skid- vehicle for obstacles such as branches that ding or sliding.

  • Page 98: Encountering Obstacles

    Encountering obstacles If you cannot go around an obstacle, such as a fallen tree or a ditch, stop the vehicle where it is safe to do so. Set the parking brake and get out to inspect the area thoroughly. Look from both your approach side and exit side.

  • Page 99: Periodic Maintenance And Adjustment

    If you are not familiar with vehicle service, have a Yamaha dealer perform service.

  • Page 100: Owner's Manual And Tool Kit

    EVU00660 Owner’s manual and tool kit You are recommended to put this owner’s manual in the vinyl bag and always carry it un- derneath the driver seat as shown. Put the owner’s tool kit and tire pressure gauge in the space beside the battery.
  • Page 101 If you do not have a torque wrench available during a service operation requiring one, take your vehicle to a Yamaha dealer to check the torque settings and adjust them as necessary.

  • Page 102: Periodic Maintenance Chart For The Emission Control System

    However, keep in mind that if the vehicle isn’t used for a long period of time, the month maintenance intervals should be followed. Items marked with an asterisk should be performed by a Yamaha dealer as they require spe- cial tools, data and technical skills.

  • Page 103: General Maintenance And Lubrication Chart

    EVU01650 General maintenance and lubrication chart INITIAL EVERY month Whichever ITEM ROUTINE comes first 1,200 2,400 2,400 4,800 (mi) (200) (750) (1,500) (1,500) (3,000) hours • Check coolant leakage. Cooling system • Repair if necessary. • Replace coolant every 24 months. Air filter elements •...
  • Page 104 INITIAL EVERY month Whichever ITEM ROUTINE comes first 1,200 2,400 2,400 4,800 (mi) (200) (750) (1,500) (1,500) (3,000) hours Drive shaft universal joint* • Lubricate with lithium-soap-based grease. • Check for cracks or damage. Engine mount* • Check bolt tightness. •...

  • Page 105: Hood

    EVU00680 Hood To open Unhook the hood latches, and then slowly tilt the hood up until it stops. 1. Hood 1. Latch (× 2)
  • Page 106 To close NOTICE Lower the hood slowly to its original position, Make sure that all cables and wires are and then hook the hood latches. Secure pro- in place when closing the hood. jections 1 on the rear of the hood into slots 2 Do not drive the vehicle with the hood on the back of the instrument panel.

  • Page 107: Console

    EVU00691 Console To install 1. Place the console in its original position. To remove 2. Install the parking brake lever boot. 1. Remove the seats. (See pages 4-16– 3. Install the seats. 4-17 for seat removal and installation NOTICE procedures.) When installing the console, be sure not 2.

  • Page 108: Engine Oil And Oil Filter Cartridge

    EVU00701 Engine oil and oil filter cartridge 5. Insert the dipstick in the oil filler hole Check engine oil level before each operation. (without screwing it in), and then remove In addition, change the oil and the oil filter car- it again to check the oil level.
  • Page 109 7. Insert the dipstick into the oil filler hole, To change the engine oil (with or without and then tighten the oil filler cap. oil filter cartridge replacement) 8. Reinstall the console. 1. Remove the console. (See page 8-9 for console removal and installation proce- dures.) 2.
  • Page 110 Make sure the O-ring is seated properly. 5. Remove the oil filter cartridge with an oil filter wrench. An oil filter wrench is avail- able from a Yamaha dealer. 1. O-ring 7. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the 1.
  • Page 111 9. Add the specified amount of recommend- ed engine oil, and then reinstall the en- gine oil filler cap and tighten it. NOTICE: Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. Recommended engine oil: See page 10-2.
  • Page 112 10. Start the engine, and then let it idle for NOTICE several minutes while checking it for oil In order to prevent clutch slippage leakage. If oil is leaking, immediately turn (since the engine oil also lubricates the the engine off and check for the cause. clutch), do not mix any chemical addi- 11.

  • Page 113: Final Gear Oil

    EVU00710 Final gear oil 3. If the oil is below the brim of the filler hole, add sufficient oil of the recommended Checking the final gear oil level type to raise it to the correct level. 1. Park the vehicle on a level surface. NOTICE: Be sure no foreign material 2.
  • Page 114 Changing the final gear oil 5. Add the recommended final gear oil up to 1. Park the vehicle on a level surface. the brim of the filler hole. NOTICE: Be 2. Place a container under the final gear sure no foreign material enters the fi- case to collect the used oil.

  • Page 115: Differential Gear Oil

    EVU00721 Differential gear oil 3. Reinstall the differential gear oil filler bolt, and then tighten it to the specified torque. Checking the differential gear oil level Tightening torque: 1. Park the vehicle on a level surface. Differential gear oil filler bolt: 2.
  • Page 116 Recommended oil: SAE 80 API GL-5 Hypoid gear oil Oil quantity: 0.32 L (0.28 Imp qt, 0.34 US qt) 6. Reinstall the differential gear oil filler bolt, and then tighten it to the specified torque. Tightening torque: Differential gear oil filler bolt: 1.

  • Page 117: Coolant

    EVU00732 Coolant The coolant level should be checked before each ride. Checking the coolant level 1. Park the vehicle on a level surface. 2. Open the hood. (See pages 8-7–8-8 for hood opening and closing procedures.) 3. Check the coolant level in the coolant reservoir when the engine is cold as the 1.

  • Page 118: Axle Boots

    EVU00740 Changing the coolant Axle boots The coolant must be changed by a Yamaha Check the protective boots for holes or tears. dealer at the intervals specified in the periodic If any damage is found, have them replaced maintenance and lubrication chart.

  • Page 119: Spark Plug Inspection

    EVU00750 Spark plug inspection Removal 1. Remove the console. (See page 8-9 for console removal and installation proce- dures.) 2. Remove the spark plug cap. 1. Rear axle boot (× 2 each side) 1. Spark plug cap 3. Use the spark plug wrench in the tool kit to remove the spark plug as shown.
  • Page 120 Inspection The spark plug is an important engine compo- nent and is easy to inspect. The condition of the spark plug can indicate the condition of the engine. The ideal color of the porcelain insulator around the center electrode is a medium-to- light tan for a vehicle that is being ridden nor- mally.
  • Page 121 Installation 3. Install the spark plug and tighten it to the 1. Measure the electrode gap with a wire specified torque. If a torque wrench is not thickness gauge and, if necessary, adjust available when you are installing the the gap to specification. spark plug, a good estimate of the correct torque is one-quarter to one-half turn Spark plug gap:...

  • Page 122: Cleaning The Air Filter Elements

    EVU00763 Cleaning the air filter elements 2. Remove the air filter element from the air intake duct grill by pulling it out as shown. Cleaning the intake duct air filter element 1. Remove the air intake duct grill by remov- ing the quick fastener screws.
  • Page 123 5. Reinstall the air filter element into the air Cleaning the engine air filter element intake duct grill. There is a check hose at the bottom of the air 6. Reinstall the air intake duct grill by install- filter case. If dust or water collects in this ing the quick fastener screws.
  • Page 124 3. Remove the air filter case cover by un- 4. Remove the air filter element. hooking the holders. 1. Air filter element 1. Air filter case cover holder (× 5) 2. Air filter case cover 8-26...
  • Page 125 5. Remove the sponge material from its 6. Wash the sponge material gently but frame. thoroughly in parts cleaning solvent. WARNING! Using gasoline or other flammable solvents to clean the air fil- ter element can cause a fire or explo- sion, which could lead to serious injury.
  • Page 126 Tighten all fittings securely to avoid the 11. Thoroughly apply Yamaha foam air filter possibility of unfiltered air entering the engine. oil or other quality liquid foam air filter oil NOTICE (not spray type) to the sponge material.

  • Page 127: Drive Select Lever Box Check Hose

    2P512001 EVU00770 Drive select lever box check hose V-belt cooling duct check hoses The drive select lever box check hose is locat- The V-belt cooling duct check hoses are lo- ed under the console. (See page 8-9 for con- cated under the console and cargo bed. (See sole removal and installation procedures.) If page 8-9 for console removal and installation dust or water collects in the drive select lever...

  • Page 128: V-Belt Case Drain Plug

    V-belt case, remove the drain plug to drain any water from the case. If water drains from the V-belt case after re- moving the drain plug, have a Yamaha dealer inspect the vehicle, as the water may affect 1. V-belt cooling duct check hose other engine parts.

  • Page 129: Cleaning The Spark Arrester

    EVU00792 Cleaning the spark arrester 2. Remove the tailpipe by pulling it out of the muffler. WARNING 3. Tap the tailpipe lightly, and then use a Hot exhaust system may cause burns. To wire brush to remove any carbon depos- avoid burns or fires, make sure that the en- its from the spark arrester portion of the gine is stopped and the exhaust system is...

  • Page 130: Carburetor Adjustment

    Tailpipe bolt: requires very sophisticated adjustment. Most 9.5 Nm (0.95 m·kgf, 6.9 ft·lbf) adjusting should be left to a Yamaha dealer who has the professional knowledge and ex- perience to do so. However, the idling speed adjustment may be performed by the owner as a part of the usual maintenance routine.

  • Page 131: Idle Speed Adjustment

    To prevent this, the valve clear- tion b to decrease the engine speed. ance must be adjusted regularly. This adjust- ment however, should be left to a professional Yamaha service technician. 8-33...

  • Page 132: Brakes

    To check the brake pad wear, check the wear indicator grooves. If a brake pad has worn to the point that the wear indica- tor grooves have almost disappeared, have a Yamaha dealer replace the brake pads as a set. 8-34...

  • Page 133: Rear Brake Pad Check

    If a brake pad has worn to the point that the wear indica- tor grooves have almost disappeared, have a Yamaha dealer replace the brake pads as a set. 1. Minimum level mark Insufficient brake fluid may allow air to enter the brake system, possibly causing the brakes to become ineffective.

  • Page 134: Brake Fluid Replacement

    Always clean up spilled and closing procedures.) fluid immediately. Observe these precautions: Have a Yamaha dealer inspect the brake When checking the fluid level, make sure system if the brake fluid level goes down. the top of the brake fluid reservoir is level.

  • Page 135: Checking The Brake Pedal

    EVU01220 EVU00870 Checking the brake pedal Parking brake lever free play adjustment Have a Yamaha dealer check the brakes at Periodically check the parking brake lever free the intervals specified in the periodic mainte- play and adjust it if necessary.
  • Page 136 a. Parking brake lever free play 1. Locknut 2. Adjusting nut 7. Turn the adjusting nut in direction a to 5. The parking brake lever must be re- increase the free play or in direction b to leased when checking and adjusting the parking brake lever free play.

  • Page 137: Brake Light Switch Adjustment

    EVU00880 Brake light switch adjustment The brake light switch, which is activated by the brake pedal, is properly adjusted when the brake light comes on just before braking takes effect. If necessary, adjust the brake light switch as follows. 1. Open the hood. (See pages 8-7–8-8 for hood opening and closing procedures.) 2.

  • Page 138: Cable Inspection And Lubrication

    Cables can also become frayed or kinked. Lubricate the cable ends. If the cables do not operate smoothly, ask a Yamaha dealer to re- place them. Recommended lubricant: Lithium-soap-based grease...

  • Page 139: Rear Knuckle Upper And Lower Pivot Lubrication

    EVU00910 EVU00920 Rear knuckle upper and lower pivot Steering shaft lubrication lubrication Lubricate the pivot points. Lubricate the knuckle upper and lower pivots Recommended lubricant: with a grease gun. Lithium-soap-based grease Recommended lubricant: Lithium-soap-based grease 8-41...

  • Page 140: Wheel Removal

    EVU00930 Wheel removal Tire replacement 1. Loosen the wheel nuts. Always use the same size and type of tires 2. Elevate the vehicle and place a suitable recommended in this owner’s manual. The stand under the frame. tires that came with your Rhino were de- 3.

  • Page 141: Wheel Installation

    EVU00940 The tires listed below have been approved by Wheel installation Yamaha Motor Manufacturing Corporation of 1. Install the wheel and the nuts. America for this model. The arrow mark on the tire must point toward the rotating direction of...
  • Page 142 Wheel nut torque: Front: 55 Nm (5.5 m·kgf, 40 ft·lbf) Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf) 1. Arrow mark 1. Tapered nut 8-44...

  • Page 143: Battery

    You could be poisoned or severely burned If the battery seems to have discharged, con- by the sulfuric acid in battery electrolyte. sult a Yamaha dealer. In case of accidental contact with battery NOTICE electrolyte: Do not try to remove the sealing caps of EXTERNAL: Flush with water.

  • Page 144: Battery Maintenance

    EVU00960 Battery maintenance 1. If the vehicle will not be used for a month or longer, remove the battery and store it in a cool, dark place. Completely re- charge the battery before reinstallation. NOTICE A special battery charger (constant volt- age/ampere or constant voltage) is re- quired recharging...

  • Page 145: Jump-Starting

    Jump-starting However, if the vehicle must be jump-started, Jump-starting the vehicle should be avoided. proceed as follows. The battery should be removed and charged 1. Turn the key to “OFF”. instead. 2. Open the hood. (See pages 8-7–8-8 for hood opening and closing procedures.) WARNING 3.
  • Page 146 6. Start the engine. (Refer to “Starting a cold engine” on pages 6-2–6-5.) 7. After the engine starts, disconnect the negative lead of the jumper cable from the vehicle and charged battery, and then disconnect the positive lead of the jumper cable from the charged battery and the battery in the vehicle.

  • Page 147: Fuse Replacement

    EVU00970 Fuse replacement Turn the key to “OFF” and turn off the electri- The main fuse and the fuse box are located cal circuit in question. under the hood. (See pages 8-7–8-8 for hood NOTICE opening and closing procedures.) To prevent accidental short-circuiting, If a fuse is blown, turn off the main switch and turn off the main switch when checking or install a new fuse of the specified amperage.
  • Page 148 8. Backup fuse (for odometer and clock on Special Edition models) device operates. 9. Carburetor warmer fuse 10. Spare fuse (× 3) 4. If the fuse blows again immediately, have a Yamaha dealer check the electrical system. 5. Reinstall the battery compartment cover. 6. Close the hood. 8-50...

  • Page 149: Replacing A Headlight Bulb

    EVU01670 Replacing a headlight bulb 3. Remove the headlight bulb holder cover If a headlight bulb burns out, replace it as fol- by pulling it off. lows. 1. Lift the hood up. (See pages 8-7–8-8 for hood opening and closing procedures.) 2.
  • Page 150 4. Remove the headlight bulb holder by 5. Wait for the headlight bulb to cool before pushing it in and turning it counterclock- touching or removing it. Remove the bulb wise. by pulling it out. 6. Insert a new headlight bulb into the bulb holder by pushing it in.

  • Page 151: Headlight Beam Adjustment

    Headlight beam adjustment and turning it clockwise. NOTICE Reinstall the bulb holder cover and the It is advisable to have a Yamaha dealer cover at the rear of the headlight. make this adjustment. NOTICE: Make sure the headlight bulb holder cover is securely fitted over the To raise the beam, turn the adjusting screw in direction a.

  • Page 152: Tail/Brake Light Bulb Replacement

    EVU01000 Tail/brake light bulb replacement If a tail/brake light bulb burns out, replace it as follows: 1. Remove the quick fastener screws and bolts from panel A (if replacing the left tail/brake light bulb) or panel B (if replac- ing the right tail/brake light bulb). 1.
  • Page 153 2. Lift the cargo bed up. (See pages 4-19– 7. Reinstall the bulb holder (together with 4-20 for cargo bed lifting and lowering the bulb) by turning it clockwise. procedures.) 8. Install the panel. 3. Remove the panel. 9. Lower the cargo bed. 4.

  • Page 154: Troubleshooting

    If your vehicle damage. requires any repair, take it to a Yamaha deal- The skilled technicians at a Yamaha dealer- ship have the tools, experience, and know- how to properly service your vehicle. Use only genuine Yamaha parts on your vehicle.

  • Page 155: Troubleshooting Charts

    There is fuel. No fuel. from the fuel pump. fuel flow. clogged. Check if there is fuel in the fuel tank. Ask a Yamaha dealer to Supply fuel. Restart the engine. No fuel. inspect. 2. Compression There is compression. Compression normal.
  • Page 156 Restart the engine. If the engine overheats again, ask a Level is OK. Yamaha dealer to inspect and/or repair the cooling system. If it is difficult to get the recommended coolant, tap water can be used temporarily, provided that it is changed to the recommended coolant as soon as possible.

  • Page 157: Cleaning And Storage

    EVU01030 C LEANING AND STORAGE 3. Rinse the dirt and degreaser off with a garden hose. Use only enough pressure A. Cleaning to do the job. WARNING! Test the Frequent, thorough cleaning of your vehicle brakes after washing. Apply the will not only enhance its appearance but will brakes several times at slow speeds improve its general performance and extend...

  • Page 158: Storage

    1. Fill the fuel tank with fresh fuel and add 6. Clean the seats with a vinyl upholstery the specified amount of Yamaha Fuel cleaner to keep the covers pliable and Stabilizer and Conditioner or equivalent glossy.
  • Page 159 5. Block up the frame to raise all wheels off nates the need to drain the fuel system. Con- the ground. sult a Yamaha dealer if the fuel system needs 6. Tie a plastic bag over the exhaust pipe to be drained.

  • Page 160: Specifications

    EVU01050 S PECIFICATIONS Model YXR45FX Dimensions: Overall length 2,885 mm (113.6 in) Overall width 1,385 mm (54.5 in) Overall height 1,853 mm (73.0 in) Seat height 818 mm (32.2 in) Wheelbase 1,910 mm (75.2 in) Ground clearance 280 mm (11.0 in) Minimum turning radius 3,900 mm (154 in) Basic weight:...
  • Page 161 Model YXR45FX Engine oil: Type: 110 130 ˚F YAMALUBE 4 (20W-50) or SAE 20W-50 YAMALUBE 4 (10W-40) or SAE 10W-40 YAMALUBE 4-CW (5W-30) or SAE 5W-30 50 ˚C Recommended engine oil classification API service SG type or higher, JASO standard MA NOTICE In order to prevent clutch slippage (since the en- gine oil also lubricates the clutch), do not mix any...
  • Page 162 Model YXR45FX Final gear case oil: Type SAE 80 API GL-4 Hypoid gear oil Quantity 0.25 L (0.22 Imp qt, 0.26 US qt) Differential gear case oil: Type SAE 80 API GL-5 Hypoid gear oil Quantity 0.32 L (0.28 Imp qt, 0.34 US qt) Radiator capacity (including all routes): 2.70 L (2.38 Imp qt, 2.85 US qt) Air filter:...
  • Page 163 Model YXR45FX Transmission: Primary reduction system V-belt Secondary reduction system Shaft drive 43/20 × 24/17 × 33/9 (11.129) Secondary reduction ratio Transmission type V-belt automatic Operation Right hand operation Reverse gear 30/15 (2.000) Sub transmission ratio 43/18 (2.389) high 39/22 (1.773) Chassis: Frame type Steel tube frame...
  • Page 164 Model YXR45FX Brakes: System Front and rear unified Type front Dual disc brake rear Single disc brake Operation Foot operation Suspension: Front suspension Double wishbone Rear suspension Double wishbone Shock absorber: Front shock absorber Coil spring/oil damper Rear shock absorber Coil spring/oil damper Wheel travel: Front wheel travel...
  • Page 165 Model YXR45FX Bulb voltage, wattage × quantity: 12 V 30.0 W/30.0 W × 2 Headlight 12 V 5.0 W/21.0 W × 2 Tail/brake light Indicator lights: 12 V 1.7 W × 1 Neutral indicator light LED (Special Edition models) 12 V 1.7 W × 1 Reverse indicator light LED (Special Edition models) 12 V 1.7 W ×...
  • Page 166 Model YXR45FX Specified fuses: Main fuse 30.0 A Headlight fuse 15.0 A Ignition fuse 10.0 A Auxiliary DC jack fuse 10.0 A Four-wheel-drive motor fuse 3.0 A Carburetor warmer fuse 10.0 A Signaling system fuse 10.0 A Backup fuse 10.0 A 10-7...

  • Page 167: Consumer Information

    Record the key identification number, vehicle identification number, and model label infor- mation in the spaces provided for assistance when ordering spare parts from a Yamaha 2. VEHICLE IDENTIFICATION NUMBER: dealer or for reference, in case the vehicle is ACA-02E stolen.
  • Page 168 EVU00100 EVU00110 Key identification number Vehicle identification number The key identification number is stamped on The vehicle identification number is stamped the key, as shown in the following illustration. into the frame. This number can be used for ordering a new key.
  • Page 169 Model label The model label is affixed to the frame under the driver seat. Record the information on this label in the space provided. This information will be needed to order spare parts from your Yamaha dealer. 1. Model label 11-3...

  • Page 170: Noise Regulation

    EVU01060 NOISE REGULATION TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inop- erative by any person other than for purposes of maintenance, repair, or replacement of any de- vice or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 171: Maintenance Record

    EVU01070 MAINTENANCE RECORD Copies of work orders and/or receipts for parts you purchase and install will be required to docu- ment maintenance done in accordance with the warranty. The chart below is printed only as a re- minder to you that the maintenance work is required. It is not acceptable proof of maintenance work.

  • Page 172: Yamaha Motor Corporation, U.s.a. Side × Side Vehicle Limited Warranty

    EVU01081 YAMAHA MOTOR CORPORATION, U.S.A. SIDE × SIDE VEHICLE LIMITED WARRANTY Yamaha Motor Corporation, U.S.A. hereby warrants THE CUSTOMER’S RESPONSIBILITY under this YAMAHA MOTOR CORPORATION, U.S.A. MAKES that new Yamaha Side × Side vehicles purchased NO OTHER WARRANTY OF ANY KIND, EXPRESSED warranty shall be to: from an authorized Yamaha Side ×...

  • Page 173: Yamaha Extended Service (Y.e.s.)

    EVU01090 YAMAHA EXTENDED SERVICE (Y.E.S.) 11-7...
  • Page 174 11-8...
  • Page 176 YAMAHA MOTOR CO., LTD. PRINTED IN USA 2007.08-2.9×1 CR...

This manual is also suitable for:

Yxr45fxRhino 450 yxr45fx

Table of Contents