Parking Brake Adjustment - Yamaha RS90GTZ Service Manual

PARKING BRAKE ADJUSTMENT

PARKING BRAKE ADJUSTMENT
1. Remove:
• Side cover (right)
2. Measure:
• Parking brake cable distance
3. Adjust:
• Parking brake cable
Adjustment steps:
• Loosen the locknut
• Turn the adjuster
fied distance
Turning in
Turning out
• Tighten the locknut.
4. Measure:
• Brake pad clearance (
5. Adjust:
• Brake pad clearance
Adjustment steps:
• Loosen the locknut
• Turn the adjuster
fied clearance between the parking brake
pad
• Tighten the locknut.
6. Install:
• Side cover (right)
2-36
Refer to "COWLINGS" in CHAPTER 3.
Out of specification → Adjust.
Parking brake cable distance:
43.5 ~ 46.5 mm (1.713 ~ 1.831 in)
.
in or out until the speci-
is obtained.
Distance is increased.
Distance is decreased.
Parking brake cable locknut:
6 Nm (0.6 m•kgf, 4.3 ft•lbf)
Out of specification → Adjust.
Brake pad clearance (
1.5 ~ 2.0 mm (0.059 ~ 0.079 in)
.
in or out until the speci-
and brake disc
Parking brake adjusting locknut:
15 Nm (1.5 m•kgf, 11 ft•lbf)
Refer to "COWLINGS" in CHAPTER 3.
INSP
ADJ
+ )
+ ):
is obtained.