TROUBLESHOOTING
1. Connect:
• Starter relay terminals
(battery side and starter motor side)
Jumper lead
2. Inspect:
• Starter motor operation
*
ELECTRICAL STARTING SYSTEM
STARTER MOTOR DOES NOT OPERATE.
OK
8-15
Check the battery and connectors.
Refer to "BATTERY INSPECTION" in CHAP-
TER 2.
OK
Charge or replace the battery.
Refer to "BATTERY INSPEC-
TION" in CHAPTER 2.
Repair or replace the starter motor.
WARNING
A wire for the jumper lead
equivalent capacity as that of the battery
lead or more, otherwise it may cause the
jumper lead to be burned.
This check is likely to produce sparks, so
be sure that no flammable gas or fluid is in
the vicinity.
ELEC
NO
NO
must have the