CRANKCASE
6. Tighten:
• Crankcase bolts
TIP
Tighten the bolts in the order of the embossed
numbers on the crankcase.
Crankcase bolt
24 Nm (2.4 m•kgf, 17 ft•lbf)
Crankcase bolt
12 Nm (1.2 m•kgf, 8.7 ft•lbf)
7. Install:
• Primary sheave drive shaft assembly bolts
Primary sheave drive shaft
assembly bolt:
12 Nm (1.2 m•kgf, 8.7 ft•lbf)
8. Install:
• Crankshaft position sensor
• Crankshaft position sensor bolt
TIP
Put the crankshaft position sensor lead
the AC magneto side and then install the plate
.
Crankshaft position sensor bolt:
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
LOCTITE
5-63
ENG
~
~
:
~
:
®
to