IMPORTANT INFORMATION
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for stains, rust, mois-
ture, etc.
1. Disconnect:
• Lead
• Coupler
• Connector
2. Inspect:
• Lead
• Coupler
• Connector
Moisture → Dry with an air blower.
Rust/stains → Connect and disconnect several times.
3. Inspect:
• All connections
Loose connection → Connect properly.
TIP
If the pin
on the terminal is flattened, bend it up.
4. Connect:
• Lead
• Coupler
• Connector
TIP
Make sure all connections are tight.
1-4
GEN
INFO