Checking Of Connections - Yamaha 2004 YXR660 Service Manual

CHECKING OF CONNECTIONS

EB801000
CHECKING OF CONNECTIONS
Check the connectors for stains, rust, mois-
ture, etc.
1. Disconnect:
• connector
2. Check:
• connector
Moisture → Dry each terminal with an air
blower.
Stains/rust → Connect and disconnect the
terminals several times.
3. Check:
• connector leads
Looseness → Bend up the pin 1 and con-
nect the terminals.
4. Connect:
• connector terminals
NOTE:
The two terminals "click" together.
5. Check:
• continuity (using a pocket tester)
NOTE:
• If there is no continuity, clean the terminals.
• When checking the wire harness be sure to
perform steps 1 to 3.
• As a quick remedy, use a contact revitalizer
available at most part stores.
• Check the connector with a pocket tester as
shown.
1 - 7
GEN
INFO