Checking Of Connections - Yamaha 5KM2-AE1 Service Manual

CHECKING OF CONNECTIONS

EB801000
CHECKING OF CONNECTIONS
Check the connectors for stains, rust, mois-
ture, etc.
1.Disconnect:
Connector
G
2.Check:
Connector
G
Moisture → Dry each terminal with an air
blower.
Stains/rust → Connect and disconnect the
terminals several times.
3.Check:
Connector leads
G
Looseness → Bend up the pin 1 and con-
nect the terminals.
4.Connect:
Connector terminals
G
NOTE:
The two terminals "click" together.
5.Check:
Continuity (using a pocket tester)
G
NOTE:
If there is no continuity, clean the terminals.
G
When checking the wire harness be sure to
G
perform steps 1 to 3.
As a quick remedy, use a contact revitalizer
G
available at most part stores.
Check the connector with a pocket tester as
G
shown.
1 - 12
GEN
INFO