Power Supply Assembly; Removal - Keysight n9020a Service Manual

Mxa signal analyzer

Hide thumbs Also See for n9020a:

Table of Contents

Assembly Replacement Procedures

Power Supply Assembly

1. Remove the instrument outer case. Refer to the Instrument Outer

2. Remove the rear panel. Refer to the Rear Panelremoval procedure.

3. Remove the top brace and reference bracket. Refer to the Top Brace and

4. Remove the reference assembly. Refer to the Reference Assembly removal

5. Remove the CPU assembly. Refer to the CPU Assembly removal

7. The power supply assembly can be removed from the chassis by pulling

Caseremoval procedure.

Reference Bracket removal procedure.

14-46. Remove the three screws (1) attaching the power

supply (2) to the power supply bracket (3).

straight out the back.

X seriesN9020a