Condition Errors 701 To 799, Operation - Keysight n9020a Service Manual

Instrument Messages
Condition Messages
Err# Bit in Message
status
register
619 9
Integrity
621 10 unused
623 11 unused
625 12 unused
627 13 unused
629 14 unused

Condition Errors 701 to 799, Operation

This series of errors corresponds to the bits in the STATus:OPERation
register, which can be read with a STATus:OPERation? event query or a
STATus:OPERation:CONDition? query.
An event with the error number shown in the table means the condition has
been detected. When the condition is cleared, an event with the error number
plus 1000 is generated.
For example, error 721 indicates that the DC Coupled condition has been
detected; error 1721 indicates that condition has been cleared.
Unless otherwise noted in the Error or Warning column below, these are status
bits only, with no corresponding error message or number
Err# Bit in Message
status
register
701 0
Calibrating
703 1
Settling
705 2 unused
707 3
Sweeping
709 4
Measuring
711 5
Waiting for Trigger
713 6
Waiting for Arm
Error or More Information
Warning
status bit This bit is the summary bit for the
only STATus:QUEStionable:INTegrity sub-register.
Error or More Information
Warning
status bit
only
status bit
only
status bit
only
status bit
only
status bit
only
status bit
only
134