Keysight X Series Manual
Signal analyzers internal preamplifier
Hide thumbs
Also See for X Series:
- Programmer's reference manual (2650 pages) ,
- Measurement manual (225 pages) ,
- Manual (119 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Keysight X Series
Summary of Contents for Keysight X Series
- Page 1 Keysight X-Series Signal Analyzers Internal Preamplifier Installation Note...
- Page 2 The information contained in this document is subject to change without notice. Keysight Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
- Page 3 P44 - Preamplifier, 44 GHz P4L - Preamplifier, 44 GHz, Basic P50 - Preamplifier, 50 GHz P5L - Preamplifier, 50 GHz, Basic To Be Performed By: ( ) Keysight Service Center (X) Personnel Qualified by Keysight (X) Customer Estimated Installation Time: 0.5 Hours...
- Page 4 2. The latest revision of the X-Series signal analyzer software may be downloaded from: http://www.keysight.com/find/Xseries_software 3. This option is licensed for one instrument model/serial number combination. The license key will only install on the designated instrument. Installation Note N9042-90005...
-
Page 5: Tools Required
Internal Preamplifier Installation Kit Contents Quantity Description Part Number Installation Note This note Option Upgrade Entitlement Certificate 5964-5178 Tools Required — Personal computer with internet access and USB port — USB storage device with > 3 GB free memory Installation Note N9042-90005... -
Page 6: Installation Procedure Over Usb
USB Storage Device Configuration Menu 7. The signal analyzer will automatically consume the License File. (This may take a few minutes) When the License File is consumed the Keysight License Manager will display a “Successful License Installation” message similar to the one shown in... - Page 7 Internal Preamplifier Installation Kit Alternate Installation Procedure The License File can be manually installed over USB or LAN by placing the license file in the following folder on the signal analyzer C:\Program Files\Agilent\licensing Verify the Installation 1. Cycle the power on the signal analyzer. 2.
- Page 8 Select LNA On. The displayed signal amplitude should not change more than an additional +/- 0.25 dB For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your local Keysight office access the following URL, or if in the United States, call the following telephone number: http://www.keysight.com/find/assist...
- Page 9 This information is subject to change without notice. © Keysight Technologies 2020-2021 Edition 1, February 2021 N9042-90005 www.keysight.com...