Wide Band Analog If And Digital If Assemblies; Removal - Keysight n9020a Service Manual

Assembly Replacement Procedures

Wide Band Analog IF and Digital IF Assemblies

Wide Band Analog IF and Digital IF Assemblies

Removal

1. Remove the instrument outer case. Refer to the Instrument Outer
2. Remove the instrument top brace. Refer to the Top Brace and Reference
3. Refer to
Figure 14-65 Wideband I.F. Assemblies Location
4. Refer to
5. Remove ribbon cable W44.
Caseremoval procedure.
Bracket removal procedure.
Figure 14-65. Locate the Wideband Analog IF and Wideband
Digital IF assemblies.
Figure 14-66. Remove cables W51, W52, W53, W55, and W56
from the Wideband Analog IF assembly (2).
516