Condition Errors 401 To 499, Power; Condition Errors 501 To 599, Frequency - Keysight n9020a Service Manual

Instrument Messages
Condition Messages

Condition Errors 401 to 499, Power

This series of errors corresponds to the bits in the
STATus:QUEStionable:POWer register. The second column in the table
shows the corresponding bit in that register.
An event with the error number shown in the table means the condition has
been detected. When the condition is cleared, an event with the error number
plus 1000 is generated. These error numbers can be viewed in the Show Errors
screen, along with the DETECTED and CLEARED indicators.
For example, error 409 indicates a 50 MHz Oscillator Unleveled condition has
been detected, error 1409 indicates that failure has been cleared.
This register is summarized as bit 3 of the STATus:QUEStionable register, as
described in the section
page
Err# Bit in Message
status
register
401 0
RPP Tripped
403 1
Source Unleveled
405 2
Source LO Unleveled
407 3
LO Unleveled
409 4 unused
411 5 unused
413 6 unused
415 7 unused
417 8 unused
419 9 unused
421 10 unused
423 11 unused
425 12 unused
427 13 unused
429 14 unused

Condition Errors 501 to 599, Frequency

This series of errors corresponds to the bits in the
STATus:QUEStionable:FREQuency register (s. The second column in the
table shows the corresponding bit in that register.
"Condition Errors 601 to 699, Error Summaries" on
133.
Error or
Warning
W
W
E
E
131
More Information
(not currently in use)
(not currently in use)
(not currently in use)