Keysight X-Series Signal Analyzers
N9020A MXA Signal Analyzer
Service Guide
13 Replaceable Parts
What You Will Find in This Chapter
1. Part number tables for assemblies, mechanical parts, cables, front panel
2. Part location diagrams for the following:
connectors, and labels.
Figure 13-1, "Major Assemblies,"
Figure 13-2, "External Hardware (Benchtop Configuration),"
Figure 13-3, "External Hardware and Bail Handle (Option PRC),"
Figure 13-4, "External Hardware (Option PRC),"
Fig 13-5
and
Fig 13-6
Figure 13-7, "Disk Drive Tray Assembly,"
Figure 13-8, "Top Brace and Reference Bracket,"
Figure 13-9, "RF Area - Standard Instrument,"
Figure 13-10, "RF Area - Options B40, MPB, or DP2,"
Figure 13-11, "RF Area - Options B40, MPB, or DP2 (switch detail),"
Figure 13-12, "Front End Parts - Standard Instruments,"
Figure 13-13, "Front End Parts - Options MPB, B40, DP2, CR3, or CRP,"
Figure 13-14, "Front End Control Cables - early serial numbers,"
Figure 13-15, "Front End Control Cables - later serial numbers,"
Figure 13-16, "Front End Control Cables - Options B40, MPB, DP2, CR3, or
CRP,"
Figure 13-17, "Reference Board Cables - Instruments without Option B40,
MPB, DP2, B85, B1A, or B1X Serial Number < MY/SG/US52330000,"
Figure 13-18, "Reference Board Cables - Options B40, MPB, DP2 Serial
Number < MY/SG/US52330000 without Options B85, B1A, or B1X,"
Figure 13-21, "AIF/DIF Cables - Standard Instruments,"
Figure 13-22, "AIF/DIF Cables, bottom - Standard Instruments,"
Figure 13-23, "AIF/DIF Cables - Options MPB, B40, or DP2,"
CPU Assembly on
page 386
363
and
page 387