Ipv6 Mpls L3Vpn Configuration Examples; Configuring Ipv6 Mpls L3Vpns - HP HSR6800 Configuration Manual

Task
Display information about BGP
VPNv6 peers established
between PEs.
Display information about IPv6
BGP peers established between
the PE and CE in a VPN instance.
Display all BGP VPNv6 routing
information.
Display BGP VPNv6 routing
information for a specific RD.
Display BGP VPNv6 routing
information for a specific VPN
instance.
For commands that display information about a routing table, see Layer 3—IP Routing Command
Reference.

IPv6 MPLS L3VPN configuration examples

Configuring IPv6 MPLS L3VPNs

Network requirements
CE 1 and CE 3 belong to VPN 1. CE 2 and CE 4 belong to VPN 2.
VPN 1 uses route target attributes 111:1. VPN 2 uses route target attributes 222:2. Users of different
VPNs cannot access each other.
EBGP is used to exchange VPN routing information between CEs and PEs.
PEs use OSPF to communicate with each other and use MP-IBGP to exchange VPN routing
information.
Command
display bgp vpnv6 all peer [ ipv4-address
verbose | verbose ] [ | { begin | exclude |
include } regular-expression ]
display bgp vpnv6 vpn-instance
vpn-instance-name peer [ ipv6-address
verbose | verbose ] [ | { begin | exclude |
include } regular-expression ]
display bgp vpnv6 all routing-table
[ network-address prefix-length
[ longer-prefixes ] | peer ip-address
{ advertised-routes | received-routes }
[ statistic ] | statistic ] [ | { begin | exclude
| include } regular-expression ]
display bgp vpnv6 route-distinguisher
route-distinguisher routing-table
[ network-address prefix-length ] [ | { begin |
exclude | include } regular-expression ]
display bgp vpnv6 vpn-instance
vpn-instance-name routing-table
[ network-address prefix-length
[ longer-prefixes ] | peer ipv6-address
{ advertised-routes | received-routes } ]
[ | { begin | exclude | include }
regular-expression ]
402
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.