Clearing Mpls Statistics; Mpls Configuration Examples; Configuring Static Lsps - HP HSR6800 Configuration Manual

Task
Display information about LSPs
established by LDP.
Display information about
CR-LSPs established by
CR-LDP.
NOTE:
The vpn-instance vpn-instance-name option is used to specify information about an LDP instance.
For information about LDP instances, see "Configuring MPLS L3VPN."

Clearing MPLS statistics

Task
Clear MPLS statistics for one or
all MPLS interfaces.
Clear MPLS statistics for all LSPs
or the LSP with a specific index or
name.
Clear statistics for all LSPs or the
LSP with a specific incoming
label.
Clear statistics for all public
network tunnels or the one with a
specific LSP token.

MPLS configuration examples

Configuring static LSPs

Network requirements
Router A, Router B, and Router C support MPLS.
Establish static LSPs between Router A and Router C so that subnets 11.1.1.0/24 and 21.1.1.0/24
can access each other over MPLS. Test the connectivity of the static LSPs.
Command
display mpls ldp lsp [ all |
[ vpn-instance
vpn-instance-name ] [ dest-addr
mask-length ] ] [ | { begin |
exclude | include }
regular-expression ]
display mpls ldp cr-lsp [ lspid
lsr-id lsp-id ] [ | { begin | exclude |
include } regular-expression ]
Command
reset mpls statistics interface
{ interface-type interface-number |
all }
reset mpls statistics lsp { index |
all | name lsp-name }
reset mpls statistics lsp
[ in-label in-label ]
reset mpls statistics tunnel
[ token token ]
30
Remarks
Available in any view.
Available in any view.
Remarks
Available in user view.
Available in user view.
Available in user view.
Available in user view.