Configuring Mce - HP HSR6800 Configuration Manual

21.1.1.0/24
21.1.1.2/32
127.0.0.0/8
127.0.0.1/32
# Ping PE 3 from PE 4 and ping PE 4 from PE 3. PE 3 and PE 4 can ping each other:
[PE3] ping 20.1.1.2
PING 20.1.1.2: 56
Reply from 20.1.1.2: bytes=56 Sequence=1 ttl=252 time=127 ms
Reply from 20.1.1.2: bytes=56 Sequence=2 ttl=252 time=97 ms
Reply from 20.1.1.2: bytes=56 Sequence=3 ttl=252 time=83 ms
Reply from 20.1.1.2: bytes=56 Sequence=4 ttl=252 time=70 ms
Reply from 20.1.1.2: bytes=56 Sequence=5 ttl=252 time=60 ms
--- 20.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 60/87/127 ms
CE 3 and CE 4 can ping each other:
[CE3] ping ipv6 2001:2::1
PING 2001:2::1 : 56
Reply from 2001:2::1
bytes=56 Sequence=1 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=2 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=3 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=4 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=5 hop limit=64
--- 2001:2::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms

Configuring MCE

Network requirements
As shown in
different VPNs and advertise the VPN routes to PE 1 through IPv6 ISIS.
ISIS
ISIS
Direct 0
Direct 0
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
Figure 110, VPN 2 runs RIPng. Configure the MCE device to separate routes from
15 84 10.1.1.2
15 84 10.1.1.2
0 127.0.0.1
0 127.0.0.1
time = 1 ms
time = 1 ms
time = 1 ms
time = 1 ms
time = 1 ms
432
POS5/1/2
POS5/1/2
InLoop0
InLoop0