HP HSR6800 Configuration Manual page 348

[CE1-LoopBack0] quit
[CE1] mpls lsr-id 2.2.2.9
[CE1] mpls
[CE1-mpls] quit
[CE1] mpls ldp
[CE1-mpls-ldp] quit
[CE1] isis 2
[CE1-isis-2] network-entity 10.0000.0000.0002.00
[CE1-isis-2] quit
[CE1] interface loopback 0
[CE1-LoopBack0] isis enable 2
[CE1-LoopBack0] quit
[CE1] interface pos 5/1/1
[CE1-POS5/1/1] ip address 10.1.1.2 24
[CE1-POS5/1/1] isis enable 2
[CE1-POS5/1/1] mpls
[CE1-POS5/1/1] mpls ldp
[CE1-POS5/1/1] mpls ldp transport-address interface
[CE1-POS5/1/1] quit
After the configurations, PE 3 and CE 1 can establish an LDP session and IS-IS neighbor
relationship between them.
# Configure PE 4 and CE 2 in a similar way to configuring PE 3 and CE 1. (Details not shown.)
3. Perform configuration to allow CEs of the customer carrier to access PEs of the provider carrier,
and redistribute IS-IS routes to BGP and BGP routes to IS-IS on the PEs:
# Configure PE 1.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 200:1
[PE1-vpn-instance-vpn1] vpn-target 1:1
[PE1-vpn-instance-vpn1] quit
[PE1] mpls ldp vpn-instance vpn1
[PE1-mpls-ldp-vpn-instance-vpn1] quit
[PE1] isis 2 vpn-instance vpn1
[PE1-isis-2] network-entity 10.0000.0000.0000.0003.00
[PE1-isis-2] import-route bgp allow-ibgp
[PE1-isis-2] quit
[PE1] interface pos 5/1/1
[PE1-POS5/1/1] ip binding vpn-instance vpn1
[PE1-POS5/1/1] ip address 11.1.1.2 24
[PE1-POS5/1/1] isis enable 2
[PE1-POS5/1/1] mpls
[PE1-POS5/1/1] mpls ldp
[PE1-POS5/1/1] mpls ldp transport-address interface
[PE1-POS5/1/1] quit
[PE1] bgp 100
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] import isis 2
[PE1-bgp-vpn1] quit
[PE1-bgp] quit
340