Displaying And Maintaining Vpls - HP HSR6800 Configuration Manual

Step
11. Specify a tunneling policy for
the VPLS instance.

Displaying and maintaining VPLS

Task
Display the VPLS information in
the BGP routing table.
Display the MAC address table
information for one or all VPLS
instances.
Display information about VPLS
connections.
Display the AC entry information
for one or all VPLS instances. (In
standalone mode.)
Display the AC entry information
for one or all VPLS instances. (In
IRF mode.)
Display the PW entry information
for one or all VPLS instances. (In
standalone mode.)
Display the PW entry information
for one or all VPLS instances. (In
IRF mode.)
Command
tnl-policy tunnel-policy-name
Command
display bgp vpls { all | group
[ group-name ] | peer [ [ ip-address ]
verbose ] | route-distinguisher
route-distinguisher [ site-id site-id
[ label-offset label-offset ] ] } [ | { begin
| exclude | include }
regular-expression ]
display mac-address vsi [ vsi-name ]
[ blackhole | dynamic | static ]
[ count ] [ | { begin | exclude |
include } regular-expression ]
display vpls connection [ bgp | ldp |
static | vsi vsi-name ] [ block | down |
up ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
display mpls l2vpn fib ac vpls [ vsi
vsi-name | interface interface-type
interface-number ] [ slot slot-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
display mpls l2vpn fib ac vpls [ vsi
vsi-name | interface interface-type
interface-number ] [ chassis
chassis-number slot slot-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
display mpls l2vpn fib pw vpls [ vsi
vsi-name [ link link-id ] ] [ slot
slot-number ] [ verbose ] [ | { begin |
exclude | include }
regular-expression ]
display mpls l2vpn fib pw vpls [ vsi
vsi-name [ link link-id ] ] [ chassis
chassis-number slot slot-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
211
Remarks
Optional.
By default, no tunneling policy is
specified for a VPLS instance
and a VPLS instance uses the
default tunneling policy. The
default tunneling policy selects
only one tunnel in this order: LSP
tunnel, GRE tunnel, CR-LSP
tunnel.
For information about configuring
a tunneling policy, see
"Configuring MPLS L3VPN."
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.