Configuring Inter-As Ipv6 Vpn Option A - HP HSR6800 Configuration Manual

[PE2-Tunnel0] mpls
[PE2-Tunnel0] quit
7. Verify the configuration:
# Display the routing table of each CE. The CEs have learned the route to each other.
# From each CE, ping the other CE. The CEs can ping each other.
[CE1] ping ipv6 2001:2::1
PING 2001:2::1 : 56
Reply from 2001:2::1
bytes=56 Sequence=1 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=2 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=3 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=4 hop limit=64
Reply from 2001:2::1
bytes=56 Sequence=5 hop limit=64
--- 2001:2::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms

Configuring inter-AS IPv6 VPN option A

Network requirements
CE 1 and CE 2 belong to the same VPN. CE 1 accesses the network through PE 1 in AS 100 and CE
2 accesses the network through PE 2 in AS 200.
An inter-AS IPv6 MPLS L3VPN is implemented using option A, where the VRF-to-VRF method is
used to manage VPN routes.
The MPLS backbone in each AS runs OSPF.
data bytes, press CTRL_C to break
time = 1 ms
time = 1 ms
time = 1 ms
time = 1 ms
time = 1 ms
414