HP HSR6800 Configuration Manual page 139
Hide thumbs
Also See for HSR6800:
- Command reference manual (170 pages) ,
- Installation manual (146 pages) ,
- Configuration manual (95 pages)
Table of Contents
Advertisement
[RouterB] mpls lsr-id 2.2.2.2
[RouterB] mpls
[RouterB-mpls] mpls te
[RouterB-mpls] mpls rsvp-te
[RouterB-mpls] mpls te cspf
[RouterB-mpls] quit
[RouterB] interface pos 5/1/0
[RouterB-POS5/1/0] mpls
[RouterB-POS5/1/0] mpls te
[RouterB-POS5/1/0] mpls rsvp-te
[RouterB-POS5/1/0] quit
# Configure Router E.
<RouterE> system-view
[RouterE] mpls lsr-id 5.5.5.5
[RouterE] mpls
[RouterE-mpls] mpls te
[RouterE-mpls] mpls rsvp-te
[RouterE-mpls] mpls te cspf
[RouterE-mpls] quit
[RouterE] interface pos 5/1/0
[RouterE-POS5/1/0] mpls
[RouterE-POS5/1/0] mpls te
[RouterE-POS5/1/0] mpls rsvp-te
[RouterE-POS5/1/0] quit
[RouterE] interface pos 5/1/1
[RouterE-POS5/1/1] mpls
[RouterE-POS5/1/1] mpls te
[RouterE-POS5/1/1] mpls rsvp-te
[RouterE-POS5/1/1] quit
# Configure Router C.
<RouterC> system-view
[RouterC] mpls lsr-id 3.3.3.3
[RouterC] mpls
[RouterC-mpls] mpls te
[RouterC-mpls] mpls rsvp-te
[RouterC-mpls] mpls te cspf
[RouterC-mpls] quit
[RouterC] interface pos 5/1/0
[RouterC-POS5/1/0] mpls
[RouterC-POS5/1/0] mpls te
[RouterC-POS5/1/0] mpls rsvp-te
[RouterC-POS5/1/0] quit
5.
Create an MPLS TE tunnel on Router B:
Configure IGP shortcut or a static route for the MPLS TE tunnel, so that IP routing prefers the MPLS TE
tunnel interface as the outgoing interface.
Enable MPLS on the MPLS TE tunnel interface.
Configure the LSR ID of the tunnel egress node as the tunnel destination.
# Configure an MPLS TE tunnel.
131
Advertisement
Table of Contents
Troubleshooting
