HP HSR6800 Configuration Manual page 366

[UPE2-mpls-ldp] quit
[UPE2] interface gigabitethernet 2/1/1
[UPE2-GigabitEthernet2/1/1] ip address 172.2.1.1 24
[UPE2-GigabitEthernet2/1/1] mpls
[UPE2-GigabitEthernet2/1/1] mpls ldp
[UPE2-GigabitEthernet2/1/1] quit
# Configure the IGP protocol, OSPF, for example.
[UPE2] ospf
[UPE2-ospf-1] area 0
[UPE2-ospf-1-area-0.0.0.0] network 172.2.1.0 0.0.0.255
[UPE2-ospf-1-area-0.0.0.0] network 4.4.4.9 0.0.0.0
[UPE2-ospf-1-area-0.0.0.0] quit
[UPE2-ospf-1] quit
# Configure VPN instances vpn1 and vpn2, allowing CE 3 and CE 4 to access UPE 2.
[UPE2] ip vpn-instance vpn1
[UPE2-vpn-instance-vpn1] route-distinguisher 300:1
[UPE2-vpn-instance-vpn1] vpn-target 100:1 both
[UPE2-vpn-instance-vpn1] quit
[UPE2] ip vpn-instance vpn2
[UPE2-vpn-instance-vpn2] route-distinguisher 400:2
[UPE2-vpn-instance-vpn2] vpn-target 100:2 both
[UPE2-vpn-instance-vpn2] quit
[UPE2] interface gigabitethernet 2/1/2
[UPE2-GigabitEthernet2/1/2] ip binding vpn-instance vpn1
[UPE2-GigabitEthernet2/1/2] ip address 10.1.1.2 24
[UPE2-GigabitEthernet2/1/2] quit
[UPE2] interface gigabitethernet 2/1/3
[UPE2-GigabitEthernet2/1/3] ip binding vpn-instance vpn2
[UPE2-GigabitEthernet2/1/3] ip address 10.3.1.2 24
[UPE2-GigabitEthernet2/1/3] quit
# Configure UPE 2 to establish MP-IBGP peer relationship with SPE 2 and to inject VPN routes.
[UPE2] bgp 100
[UPE2-bgp] peer 3.3.3.9 as-number 100
[UPE2-bgp] peer 3.3.3.9 connect-interface loopback 0
[UPE2-bgp] ipv4-family vpnv4
[UPE2-bgp-af-vpnv4] peer 3.3.3.9 enable
[UPE2-bgp-af-vpnv4] quit
[UPE2-bgp] ipv4-family vpn-instance vpn1
[UPE2-bgp-vpn1] peer 10.1.1.1 as-number 65430
[UPE2-bgp-vpn1] import-route direct
[UPE2-bgp-vpn1] quit
[UPE2-bgp] ipv4-family vpn-instance vpn2
[UPE2-bgp-vpn1] peer 10.3.1.1 as-number 65440
[UPE2-bgp-vpn1] import-route direct
[UPE2-bgp-vpn1] quit
[UPE2-bgp] quit
5. Configure CE 3:
<CE3> system-view
358