Lenovo x3650 M4 BD 5466 Installation And Service Manual page 89

Figure 66.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation"
on page 73.
Installing a PCI riser-card assembly
Use this information to install a PCI riser-card assembly.
To install the PCI riser-card assembly, complete the following steps:
Step 1. Read the safety information that begins on page "Safety" on page v and "Installation guidelines"
on page 30.
Step 2. Make sure that the server and all peripheral devices are turned off and that the power cords and all
external cables are disconnected.
Step 3. Reinstall any adapters and reconnect any internal cables that you removed in other procedures.
Step 4. Align the PCI riser-card assembly with the alignment pin and the guide rails on the chassis.
.
Chapter 2 Installing optional devices
75