Lenovo x3650 M4 BD 5466 Installation And Service Manual page 117

The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the
Advanced Settings Utility (ASU) to update the DMI in the UEFI-based server. The ASU is an online tool that
supports several operating systems. Make sure that you download the version for your operating system.
You can download the ASU from the website. To download the ASU and update the DMI, complete the
following steps.
Note: Changes are made periodically to the website. The actual procedure might vary slightly from what is
described in this document.
1. Download the Advanced Settings Utility (ASU):
a. Go to http://www.lenovo.com/support.
b. Click the Downloads tab at the top of the panel.
c. Under ToolsCenter, select View ToolsCenter downloads.
d. Select Advanced Settings Utility (ASU).
e. Scroll down and click the link and download the ASU version for your operating system.
2. ASU sets the DMI in the Integrated Management Module (IMM). Select one of the following methods to
access the Integrated Management Module (IMM) to set the DMI:
• Online from the target system (LAN or keyboard console style (KCS) access)
• Remote access to the target system (LAN based)
• Bootable media containing ASU (LAN or KCS, depending upon the bootable media)
Note: Lenovo provides a method for building a bootable media. You can create a bootable media
using the Bootable Media Creator (BoMC) application from the Tools Center Web site. In addition,
the Windows and Linux based tool kits are also available to build a bootable media. These tool kits
provide an alternate method to creating a Windows Professional Edition or Master Control Program
(MCP) based bootable media, which will include the ASU application.
3. Copy and unpack the ASU package, which also includes other required files, to the server. Make sure
that you unpack the ASU and the required files to the same directory. In addition to the application
executable (asu or asu64), the following files are required:
• For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
• For Linux based operating systems:
– cdc_interface.sh
4. After you install ASU, Type the following commands to set the DMI:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
Where:
<m/t_model>
The server machine type and model number. Type mtm xxxxyyy, where xxxx is the machine type
and yyy is the server model number.
<s/n>
The serial number on the server. Type sn zzzzzzz, where zzzzzzz is the serial number.
<asset_method>
The server asset tag number. Type asset aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number.
.
Chapter 3 Configuration information and instructions
103