Lenovo x3650 M4 BD 5466 Installation And Service Manual page 240

Figure 160. Type 1 - SATA
• Type - SAS
Note: This backplane can be an independent configuration (Cascading with the front backplane is
unnecessary)
Figure 161. Type 2 - SAS
To install the replacement hot-swap backplane on the rear hard disk drive cage, complete the following steps.
Step 1. Read the safety information that begins on page "Safety" on page v and "Installation guidelines"
on page 30.
Step 2. Reconnect the cables.
• Type 1 - SATA
– Reconnect the LED signal, SATA signal and power cables.
Figure 162. Type 1 - SATA
226
Lenovo System x3650 M4 BDInstallation and Service Guide