Lenovo x3650 M4 BD 5466 Installation And Service Manual page 827

3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– IBM Support website
– Latest level of DSA
– Latest level of BMC/IMM
• 201-824-001 : Standalone Memory Test Aborted
Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run
the test.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– IBM Support website
– Latest level of DSA
– Latest level of BMC/IMM
• 201-824-002 : Standalone Memory Test Aborted
Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run
the test.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
Appendix C. DSA diagnostic test results
813