Replacing A Microprocessor And Heat Sink - Lenovo x3650 M4 BD 5466 Installation And Service Manual

Hide thumbs Also See for x3650 M4 BD 5466:

Table of Contents

Figure 171. Installation tool handle adjustment

Lift the microprocessor out of the socket.

Figure 172. Installation tool removal

Step 12. If you are instructed to return the microprocessor, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you. Do not return the microprocessor

installation tool.

Replacing a microprocessor and heat sink

Use this information to replace a microprocessor and heat sink

Attention: When you handle static-sensitive devices, take precautions to avoid damage from static

electricity. For details about handling these devices, see "Handling static-sensitive devices" on page 32.

• A startup (boot) microprocessor must always be installed in microprocessor connector 1 on the system

• To ensure correct server operation, make sure that you use microprocessors that are compatible and you

have installed an additional DIMM for microprocessor 2. Compatible microprocessors must have the

same QuickPath Interconnect (QPI) link speed, integrated memory controller frequency, core frequency,

power segment, cache size, and type.

Lenovo System x3650 M4 BDInstallation and Service Guide