Lenovo x3650 M4 BD 5466 Installation And Service Manual page 119

• Remote LAN access, type the command:
Note: When using the remote LAN access method to access IMM using the LAN from a client, the
host and the imm_external_ip address are required parameters.
host <imm_external_ip> [user <imm_user_id>][password <imm_password>]
Where:
imm_external_ip
The external IMM LAN IP address. There is no default value. This parameter is required.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a zero 0
not an O).
The following commands are examples of using the userid and password default values and not
using the default values:
Examples that do not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoProdName <m/t_model> –host <imm_ip>
–user <imm_user_id> –password <imm_password>
asu set SYSTEM_PROD_DATA.SYsInfoSerialNum <s/n> –host <imm_ip>
–user <imm_user_id> –password <imm_password>
asu set SYSTEM_PROD_DATA.SYsEncloseAssetTag <asset_tag>
–host <imm_ip> –user <imm_user_id> –password <imm_password>
Examples that do use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> –host <imm_ip>
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> –host <imm_ip>
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag>
–host <imm_ip>
• Bootable media: You can also build a bootable media using the applications available through the Tools
Center Web site at http://www.ibm.com/support/entry/portal/docdisplay?lndocid=LNVO-CENTER.
From the ToolsCenter, page, scroll down for the available tools.
5. Restart the server.
.
Chapter 3 Configuration information and instructions
105