Figure 176. Installation tool alignment
d.
Install the microprocessor using the following instructions for your installation tool.
• If using Installation Tool A, twist the handle on the microprocessor tool assembly
counterclockwise to the open position to insert the microprocessor into the socket, and
lift the installation tool out of the socket.
• If using Installation Tool B, twist the handle of the installation tool assembly counterclockwise
until the microprocessor is inserted into the socket, and lift the installation tool out of the
socket. The following illustration shows the tool handle in the open position.
Figure 177. Installation tool handle adjustment
.
Chapter 6
Removing and replacing components
235