Lenovo x3650 M4 BD 5466 Installation And Service Manual page 174

1
Figure 85. Hot-swap rear hard disk drive cage
Removing the hot-swap rear hard disk drive cage
Use this information to remove the hot-swap rear hard disk drive cage.
To remove the rear hot-swap hard disk drive cage, complete the following steps:
Step 1. Read the safety information that begins on page "Safety" on page vand "Installation guidelines"
on page 30.
Step 2. Turn off the server (see "Turning off the server" on page 19) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
Step 3. Remove the server top cover (see "Removing the server top cover" on page 247.
Step 4. Open the blue latches
160
Lenovo System x3650 M4 BDInstallation and Service Guide
2
3
1
on the chassis.
Release latch
3