Table of Contents
Advertisement
Chapter 6. Analyzer Operation
Overview
The InnovOx Online TOC Analyzer utilizes a touch-sensitive color LCD for all menu selection activities. Not all
menu options may be relevant or available on your Analyzer.
When the Analyzer is first powered on, a startup screen appears with basic GE Analytical Instruments contact
information and the firmware version number. The Analyzer then begins initialization to check the status of
consumables and prepare for making measurements. When the Analyzer is done with initialization, press the
Main button to display the Main screen.
The Main Screen
The Main screen provides important status information for the Analyzer. As shown in
Figure
38, the Main screen
identifies the type of measurement the Analyzer is set up to make (Online, Check Standard, Grab, or Rinse), and it
identifies its state (either Standby or analyzer Status when making a measurement).
GE Analytical Instruments ©2016
123 of 270
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
