Table of Contents
Advertisement
Chapter 9: Troubleshooting
Export Diagnostic Data
When you press the Export Diagnostics USB button, you can export diagnostic data to a USB flash memory
drive. The Analyzer exports the data in a file that includes a log of diagnostics information.
Testing the Sparger
Test the mixing bar located inside the sparger as follows:
1.
On the Diagnostics screen, press the Sparger button
2.
Press the Mixing bar button to activate the mixing bar in the sparger.
3.
Press the Mixing bar button again to stop the mixing bar.
4.
Press the Back button to return the mixing bar to its inactive state.
Contacting Technical Support
If you need further help troubleshooting any of these or other issues in North America, contact GE Analytical
Instruments Technical Support at 303.444-2009 or 888.245.2595 or techSupport.GEAI@ge.com. Technical
support in Europe, Middle East, and Africa is available at 44 (0) 161 864 6800 or
ServiceUK.Instruments@ge.com
GE Analytical Instruments ©2016
Figure 110: Sparger Diagnostics Screen
. Technical support in Asia Pacific is available at (65) 62674659 or
243 of 270
(Figure
110).
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
