Table of Contents
Advertisement
Chapter 6: Analyzer Operation
To manually set the IP address for Windows 7
1.
On the computer, click the Windows icon located on the lower-left of the screen and then select Control
Panel
Network and Sharing Center.
2.
Double-click the Local Area Connection. (Your connection may have a different name.)
3.
Click the Properties button, and then click Yes.
4.
Scroll through the list and select Internet Protocol Version 4 (TCP/IPv4)
5.
Click the Properties button and then click Yes.
6.
Select the "Use the following IP address" option.
7.
Enter an IP address. The first three numbers must be the same as those used on the Analyzer, and the
last number must be different from the one used on the Analyzer. Do not use the number 0 or 255. For
example, if the Analyzer IP address is set to the default of 192.168.1.10, you could set the computer to
192.168.1.11.
8.
Enter a subnet mask address. This should be the same numbers as those used on the Analyzer.
9.
Click the OK button.
10. Click the OK button.
11. Click the Close button.
12. Shut down, power off, and restart the computer.
To manually set the IP address for Windows XP
1.
On the computer, click the Windows icon located on the lower-left of the screen and then select Control
Panel
Network and Sharing Center.
2.
Double-click the Local Area Connection. (Your connection may have a different name.)
3.
Click the Properties button, and then click Yes.
4.
Scroll through the list and select Internet Protocol (TCP/IP)
5.
Click the Properties button.
6.
Select the radio button for "Use the following IP address"
7.
Enter an IP address. The first three numbers must be the same as those used on the Analyzer, and the
last number must be different from the one used on the Analyzer. Do not use the number 0 or 255. For
example, if the Analyzer IP address is set to the default of 192.168.1.10, you could set the computer to
192.168.1.11.
8.
Enter a subnet mask address. This should be the same numbers as those used on the Analyzer.
9.
Click the OK button.
10. Click the OK button.
GE Analytical Instruments ©2016
®
®
158 of 270
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
