Table of Contents
Advertisement
Chapter 6: Analyzer Operation
To set a daily flush start time
1.
Before you begin, ensure that you have turned On the Daily Flush, as directed in the previous section.
2.
On the Configure Online screen, press the Daily Flush Start button. A numerical keypad appears to the
right.
3.
Enter the start time in an HH:MM, 24-hour format.
Summary
You can use the Configure Online screen (Setup tab
configuration for all streams and the check standard, press the Summary button. The summary is a convenient
way to verify the configuration before starting the analysis.
Grab Measurements
Use the Grab option to specify settings for Grab analysis when performing analysis on samples contained in 40-
mL vials placed in the Vial Sampler.
To specify Grab analysis settings
1.
On the Setup tab, press the Grab button. The Analysis Protocol button appears on the right.
2.
Press the Analysis Protocol button. The Protocol screen appears with a listing of protocols.
GE Analytical Instruments ©2016
Online button
Figure 50: The Protocol Screen
139 of 270
Configure Online) to display the current
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
