Table of Contents
Advertisement
Keep foreign objects away from the Analyzer's fan to avoid introducing hazards
into the Analyzer. The cooling air inlet for the reactor is at the bottom of the
Analyzer; do not allow paper or other objects to block or enter that inlet.
If you experience an issue with the printed circuit assembly (PCA) that contains a
lithium battery, please contact GE Analytical instruments for return instructions.
Whenever changing the lithium battery, observe the correct polarity. Dispose of
used batteries according to the manufacturer's instructions and local disposal
requirements.
This equipment must be electrically grounded in accordance with local codes and
ordinances or, in the absence of local codes, in accordance with the NATIONAL
ELECTRICAL CODE, ANSI/NFPA NO. 70.
Advertencias
GE Analytical Instruments ©2016
This symbol on the instrument indicates that the product does not
contain any restricted substances included in China RoHS II.
Este símbolo, presente en el instrumento, indica que el usuario debe
consultar las instrucciones de uso en el manual.
Warning
Warning
Warning
Warning
Advertencia
23 of 270
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
