Table of Contents
Advertisement
Chapter 6: Analyzer Operation
8.
Press the Factor Name button and use the alpha/numeric keypad to type a name for the conversion
factor
(Figure
56).
9.
Press the Save button to save the conversion factor name and return to the Factor screen.
10. Press the Back button to access the other available conversion factors.
11. Repeat steps
3
Each configured conversion factor now appears when setting up Stream measurements or Grab
measurements
button from this screen.
GE Analytical Instruments ©2016
Figure 56: Configuring the Factor Name
through
10
for each conversion factor to configure.
(Figure
57), as described earlier in this chapter. To apply a conversation factor, press its
Figure 57: Using a Conversion Factor
149 of 270
DLM 68100-09 EN Rev. A
Advertisement
Table of Contents
