Figure 2 Mounting Stand - Clearances - GE Sievers Innovox Operation And Maintenance Manual

Chapter 4: Installation
Mounting brackets for
filter panel (optional)
At least two people are required to move the Mounting Stand to the selected location. Bolt the Mounting Stand
to a wall or the floor before placing the Analyzer on it. The horizontal braces shown in
so that the display of the Analyzer is approximately eye-level, but the spacing between the two horizontal
braces must be 94.5 cm.
To mount a Filter Panel on the Mounting Stand, attach the two Filter Panel brackets 30.5 cm apart, as shown in
Figure 2. Further instructions for installation of the Filter Panel are provided in the GE InnovOx Filter Panel
Operation and Maintenance Manual.
GE Analytical Instruments ©2016
44.1 in. (112.0 cm.)
12.0 in. (30.5 cm.)
37.21 in. (94.5 cm.)
Figure 2: Mounting Stand - Clearances
35.5 in. (90.2 cm.)
71.3 in. (181.3 cm.)
28.38 in. (72.1 cm.)
74 of 270
Figure 2 can be adjusted
DLM 68100-09 EN Rev. A