System Time; Figure 4.14 System > System Time - Advantech EKI-7710E-2C User Manual

4.4.6

System Time

To access this page, click System > System Time.
The following table describes the items in the previous figure.
Item
Enable SNTP
SNTP/NTP Server
Address
SNTP Port
Manual Time
Time Zone
Daylight Saving Time Click the drop-down menu to enable or disable the daylight saving
Daylight Saving Time
Offset
Figure 4.14 System > System Time
Description
Click the radio button to enable or disable the SNTP.
Enter the address of the SNTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of
a SNTP server. Unicast SNTP requests will be sent to this address. If
this address is a DNS hostname, then that hostname should be
resolved into an IP address each time a SNTP request is sent to it.
Enter the port on the server to which SNTP requests are to be sent.
Allowed range is 1 to 65535 (default: 123).
Click the drop-down menus to set local date and time of the system.
Click the drop-down menu to select a system time zone.
time settings.
Enter the offsetting variable in seconds to adjust for daylight saving
time.
44 EKI-7710 Series User Manual