Adjust Paper Type; Adjust Btr - Fuji Xerox DocuPrint CM225FW User Manual

Job Timeout
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is canceled if the
time-out time is exceeded.
Values:
Off
On* 30 sec*
5–300 sec
Maintenance
Use the Maintenance menu for maintenance work including initialization of the NVM (non-volatile memory).
NOTE:
• The value marked by an asterisk (*) is the factory default setting.

• Adjust Paper Type

Purpose:
To adjust the paper type.
Values:
Plain
Labels

• Adjust BTR

Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
Plain
Bond
Light Card
LW Gloss Card
Labels
Recycled
Envelope
232 Using the Operator Panel Menus and Keypad
Disables the job time-out.
Sets the time the printer waits for data to arrive from the computer.
Lightweight
Heavyweight*
Lightweight
Heavyweight*
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3