F/W Version; Adjust Paper Type; Adjust Btr - Fuji Xerox DocuPrint CM115 w User Manual

Maintenance
Use the Maintenance menu for maintenance work including initialization of the NVM (non-volatile memory).
NOTE:
• The value marked by an asterisk (*) is the factory default setting.

• F/W Version

Purpose:
To display the version of the controller.

• Adjust Paper Type

Purpose:
To adjust the paper type.
Values:
Plain
Labels

• Adjust BTR

Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
Plain
Bond
Light Card
LW Gloss Card
Labels
Recycled
Envelope
Lightweight
Heavyweight*
Lightweight
Heavyweight*
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
0*
-3 – 3
Using the Operator Panel Menus and Keypad 173