Configuring The Network Interface Board - Ricoh MP C2800 Operating Instructions Manual

4. Monitoring and Configuring the Printer
ID
User
Page
Result
4
Time
User ID (when designating Job ID on telnet)
JobName (when designating Job ID on telnet)
• For details about UNIX commands and parameters, see UNIX Supplement.

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command.
218
Item Description
Print request ID.
Print request user name.
Number of pages printed
Print Request Result
Communication Result
• OK
Print was completed normally. However, the
print result may not be as required due to
printer problems.
• NG
Printing was not completed normally.
• Canceled
An "rcp", "rsh", or "lpr" command print
request was canceled, possibly due to the
printing application. Not applicable to the
"ftp" or "rprinter" command.
Time the print requested was received.
Time of print request reception
Printer driver-configured User ID.
Appears when the print request ID is specified.
Name of the document for printing
Appears when the print request ID is specified.